Yoshimura Bolts
#1
Yoshimura Bolts
I'm looking for one of these Yoshimura bolts and the gold ring that its recessed into as well
I've been scouring eBay and tinternet but no luck as of yet any one know of any where or anything very similar?
Thank you
#3
It's a flat, socket, cap screw fastener in stainless steel or chrome. I get mine from Fastenal
Flat Socket Cap Screws | Fastenal
The washer is something not real standard.. it's a counter sunk washer, Aeronautic, Aerospace, and specific kits, designs use um..so likely made for the company for that kit.
M3 & M4
http://www.ebay.com/itm/T-Works-Alum...-/221011662412
Here is an M6 countersunk washer
http://www.racebolts.com/index.php?m...roducts_id=418
Another M6
http://www.accelerationkarting.com/c...shers16x8.aspx
M8
http://www.racebolts.com/index.php?m...roducts_id=664
More M8
http://www.accelerationkarting.com/washers.aspx
Another M8
http://www.justletmebead.com/product_p/aacw-b.htm
Stamped steel version
http://www.mcmaster.com/#standard-co...ashers/=hitsnw
And a really neat type that is self aligning and used with a machine, pan head or cap screw
http://www.mcmaster.com/#self-aligning-washers/=hitsl8
This last type from McMaster Carr is available in male or female half individually, so if you get the female half alone, it's pretty much what your looking for.
Flat Socket Cap Screws | Fastenal
The washer is something not real standard.. it's a counter sunk washer, Aeronautic, Aerospace, and specific kits, designs use um..so likely made for the company for that kit.
M3 & M4
http://www.ebay.com/itm/T-Works-Alum...-/221011662412
Here is an M6 countersunk washer
http://www.racebolts.com/index.php?m...roducts_id=418
Another M6
http://www.accelerationkarting.com/c...shers16x8.aspx
M8
http://www.racebolts.com/index.php?m...roducts_id=664
More M8
http://www.accelerationkarting.com/washers.aspx
Another M8
http://www.justletmebead.com/product_p/aacw-b.htm
Stamped steel version
http://www.mcmaster.com/#standard-co...ashers/=hitsnw
And a really neat type that is self aligning and used with a machine, pan head or cap screw
http://www.mcmaster.com/#self-aligning-washers/=hitsl8
This last type from McMaster Carr is available in male or female half individually, so if you get the female half alone, it's pretty much what your looking for.
Last edited by E.Marquez; 05-13-2012 at 05:24 PM.
#4
Thanks for the help guy's
Got a post on the UK site by Mik off here he's sorted me out with a UK company and the same washer etc, that man has a keen aye
Thanks again Mik and to you both for your help also
Got a post on the UK site by Mik off here he's sorted me out with a UK company and the same washer etc, that man has a keen aye
Thanks again Mik and to you both for your help also
Thread
Thread Starter
Forum
Replies
Last Post
mdbuehler
General Discussion
38
02-06-2006 07:59 AM