SuperHawk Forum

General Discussion Anything SuperHawk Related

vfr front rim fitment

Thread Tools
 
Search this Thread
 
Old 12-06-2011, 04:48 PM
  #1  
Senior Member
Back Marker
Thread Starter
 
jeephawk's Avatar
 
Join Date: May 2011
Location: Farnorcal
Posts: 160
jeephawk is on a distinguished road
vfr front rim fitment
Anyone know if a 1991 Vfr 750 front rims will bolt right up to a chicken?
Can I use my rotors and bolt them up too. Thanks
jeephawk is offline  
Reply
Old 12-06-2011, 05:07 PM
  #2  
Senior Member
SuperBike
 
JamieDaugherty's Avatar
 
Join Date: Aug 2005
Location: Fort Wayne, IN
Posts: 1,858
JamieDaugherty is on a distinguished road
Negative on first question.
Negative on second.

1991 VFR750 wheels are very different, sorry.
JamieDaugherty is offline  
Reply
Old 12-06-2011, 06:09 PM
  #3  
Senior Member
Superstock
 
102dals's Avatar
 
Join Date: Jul 2004
Location: Little Rock, AR
Posts: 442
102dals is an unknown quantity at this point
Jamie,
What VFR front wheels bolt up, and take VTR rotors directly?
Andy
102dals is offline  
Reply
Old 12-06-2011, 06:47 PM
  #4  
the boss
SuperBike
 
saige's Avatar
 
Join Date: Mar 2010
Location: largo,fl
Posts: 1,182
saige is on a distinguished road
i beleive its the 98 to 01 vfr that is direct bolt on.
there is the 94 to 97's,but i dont think those are correct.
saige is offline  
Reply
Old 12-07-2011, 11:09 AM
  #5  
Senior Member
Back Marker
Thread Starter
 
jeephawk's Avatar
 
Join Date: May 2011
Location: Farnorcal
Posts: 160
jeephawk is on a distinguished road
Thanks, Yeah I realized the difference but then couldnt delete post.
Had a memory lapse on top of finding a deal on a front wheel.
Fronts are kinda hard to find. (I cant stand the three spokers)
jeephawk is offline  
Reply
Old 12-07-2011, 02:25 PM
  #6  
Senior Member
Superstock
 
selztoad's Avatar
 
Join Date: Jul 2006
Location: fayetteville NC
Posts: 468
selztoad is on a distinguished road
Originally Posted by jeephawk
Anyone know if a 1991 Vfr 750 front rims will bolt right up to a chicken?
Can I use my rotors and bolt them up too. Thanks
I have a stock front rim and rotors (rim could use repainting) rotors are in great shape...I will sell you for $75 shipped
selztoad is offline  
Reply
Old 12-07-2011, 04:40 PM
  #7  
Senior Member
Back Marker
Thread Starter
 
jeephawk's Avatar
 
Join Date: May 2011
Location: Farnorcal
Posts: 160
jeephawk is on a distinguished road
sounds good! thanks
jeephawk is offline  
Reply
Old 12-07-2011, 08:30 PM
  #8  
Senior Member
Back Marker
 
slo1's Avatar
 
Join Date: Aug 2006
Location: Utah
Posts: 249
slo1 is on a distinguished road
Originally Posted by saige
i beleive its the 98 to 01 vfr that is direct bolt on.
there is the 94 to 97's,but i dont think those are correct.
Negatory on the 98 - 01 vfr. Unusual for Honda, those fit nothing else that I know of. Only 98-01 vfr.

The 94-97 vfr is the one, that and cbr F3 (NOT f2 or f4i).
Last edited by slo1; 12-07-2011 at 09:53 PM. Reason: I suck, sometimes
slo1 is offline  
Reply
Old 12-07-2011, 08:37 PM
  #9  
Senior Member
Superstock
 
102dals's Avatar
 
Join Date: Jul 2004
Location: Little Rock, AR
Posts: 442
102dals is an unknown quantity at this point
Our rotors bolt directly onto the 94-97s, right?
102dals is offline  
Reply
Old 12-07-2011, 08:47 PM
  #10  
Senior Member
Back Marker
 
slo1's Avatar
 
Join Date: Aug 2006
Location: Utah
Posts: 249
slo1 is on a distinguished road
Originally Posted by 102dals
Our rotors bolt directly onto the 94-97s, right?
Yep, rotors, bearings, seals, all the same. Shawk, 94-97 vfr and f3 (vfr400 as well).

Wheel spacers and axles are bike specific, since Shawk fork lowers are fatter. Found out the hard way when I put Shawk forks on a 96 vfr.
slo1 is offline  
Reply
Old 12-07-2011, 09:05 PM
  #11  
Senior Member
SuperSport
 
matt365's Avatar
 
Join Date: Aug 2010
Location: Toronto, Ontario, Canada
Posts: 506
matt365 is on a distinguished road
Originally Posted by slo1

The 94-97 vfr is the one, that and cbr F3 (NOT f2 or f4).

The F4 looked to me to be a direct replacement? F4i was different though.

Bolt pattern and spacing on the rotors is the same, as is the rotor size.

Axle diameter is the same too.

I considered getting one off a parts bike when I was looking for spares.

???
matt365 is offline  
Reply
Old 12-07-2011, 09:52 PM
  #12  
Senior Member
Back Marker
 
slo1's Avatar
 
Join Date: Aug 2006
Location: Utah
Posts: 249
slo1 is on a distinguished road
Originally Posted by matt365
The F4 looked to me to be a direct replacement? F4i was different though. Bolt pattern and spacing on the rotors is the same, as is the rotor size. Axle diameter is the same too.
I considered getting one off a parts bike when I was looking for spares.
???
Actually clueless on f4, read the same as you on f4i and that was my intent.

All my wheels have 5 or more spokes now
slo1 is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vfr 800 swing arm SSSa complete with rim
bpw
Classifieds
12
07-17-2013 08:18 PM
? about CBR1000RR Fork Swap rim fitment & other ?'s
katryder1@gmail.com
Modifications - Performance
5
10-27-2010 07:52 AM
929rr 954rr rear wheel fitment
superhawk205
Modifications - Performance
4
06-08-2008 08:07 AM
Jardine exhaust fitment... or lack thereof
supermarto
General Discussion
15
11-28-2007 07:56 PM
VFR bars - fitment
Rich A
General Discussion
4
03-11-2005 09:25 PM
Tags
Back to Subforum
General Discussion
View Next Unread
Painted / Powdercoated Frame




Advanced Search
Quick Reply: vfr front rim fitment


Reply Closed Thread Share

All times are GMT -7. The time now is 02:07 PM.


Top

© 2024 MH Sub I, LLC dba Internet Brands


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.