stock bulb
Thread Starter
Senior Member
SuperSport
Joined: Apr 2013
Posts: 834
From: Thousand Oaks, CA
stock bulb
is it something i can grab at pep boys/ auto zone/ napa, etcc?
i evetually want to upgrade to something better but my bulb is on its last leg and id rather not pay for shipping if i dont have to. thanks.
P.S. i searched around but couldnt find anything besides talk of uprgraded LED's and HID conversions.
i evetually want to upgrade to something better but my bulb is on its last leg and id rather not pay for shipping if i dont have to. thanks.
P.S. i searched around but couldnt find anything besides talk of uprgraded LED's and HID conversions.
Administrator
MotoGP
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
H4 or 9003 Common item at any Auto parts store.
Best Ive found at the Auto parts store is the Sylvania Silver Star Ultra
About $29 or less on sale
Sylvania SilverStar ULTRA Halogen Headlight 9003 SU: Buy best Daytime Running Lamp at Advance Auto Parts
Best Ive found at the Auto parts store is the Sylvania Silver Star Ultra
About $29 or less on sale
Sylvania SilverStar ULTRA Halogen Headlight 9003 SU: Buy best Daytime Running Lamp at Advance Auto Parts
the boss
SuperBike
SuperBike
Joined: Mar 2010
Posts: 1,182
From: largo,fl
H4 or 9003 Common item at any Auto parts store.
Best Ive found at the Auto parts store is the Sylvania Silver Star Ultra
About $29 or less on sale
Sylvania SilverStar ULTRA Halogen Headlight 9003 SU: Buy best Daytime Running Lamp at Advance Auto Parts
Best Ive found at the Auto parts store is the Sylvania Silver Star Ultra
About $29 or less on sale
Sylvania SilverStar ULTRA Halogen Headlight 9003 SU: Buy best Daytime Running Lamp at Advance Auto Parts
will help some if you adjust the headlight.there is screws behind the head light that will allow you to pitch it up and down,left and right.
the boss
SuperBike
SuperBike
Joined: Mar 2010
Posts: 1,182
From: largo,fl
I agree,if at all,just dont touch the bulb at all and you will be good.
I didnt like spending the money,but after a year and half,i can see thru the turns at night,just watch out for wild life"at night" lol they dont care what light you have
every and any animal has those eyes like deer in head lights look
Moderator
MotoGP
Joined: Jul 2007
Posts: 5,221
From: Gettysburg, Pa
The old saying opinions are like a**holes...
I have personally popped 2 or 3 Silverstars in a short amount of time which makes me recommend against getting them (I am meticulous in not touching the bulb), YMMV. My Piaa's have lasted almost 10 years in my car, I just had a Phillips X-treme Vision go out in my truck after about 5, the Hella that I'm using on the Hawk as lasted 2 or 3 seasons now. Like I said, just my .02
I have personally popped 2 or 3 Silverstars in a short amount of time which makes me recommend against getting them (I am meticulous in not touching the bulb), YMMV. My Piaa's have lasted almost 10 years in my car, I just had a Phillips X-treme Vision go out in my truck after about 5, the Hella that I'm using on the Hawk as lasted 2 or 3 seasons now. Like I said, just my .02
Administrator
MotoGP
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
The old saying opinions are like a**holes...
I have personally popped 2 or 3 Silverstars in a short amount of time which makes me recommend against getting them (I am meticulous in not touching the bulb), YMMV. My Piaa's have lasted almost 10 years in my car, I just had a Phillips X-treme Vision go out in my truck after about 5, the Hella that I'm using on the Hawk as lasted 2 or 3 seasons now. Like I said, just my .02
I have personally popped 2 or 3 Silverstars in a short amount of time which makes me recommend against getting them (I am meticulous in not touching the bulb), YMMV. My Piaa's have lasted almost 10 years in my car, I just had a Phillips X-treme Vision go out in my truck after about 5, the Hella that I'm using on the Hawk as lasted 2 or 3 seasons now. Like I said, just my .02
I refuse to do the HID bulb in a standard reflector..(lots of light, but scattered everywhere)
And was not ready to spend $165 on the DIY HID projector kit..
I Run PIAA bulbs in both my Mustang GT and GT500.. Headlight and driving light for GT.. Headlight in Gt500 uses PIAA bulbs and PIAA driving lights replaced the OEM ones. So I know what they will do and like um..
jscobey if you can find Hella or PIAA bulbs locally, go with those over the Silverstar Ultra
Administrator
MotoGP
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
Using a digital Volt Ohm meter, get a key on, motor running voltage reading on your headlight socket, high and low beam.. Should be very close to same conditions at the battery. If not you would benefit from a relay set up.
Check Ohm between the ground connector in the headlight socket and the neg battery post.. No resistance is the goal (not likely) but high resistance is bad
Last edited by E.Marquez; Jan 17, 2014 at 10:09 AM.
Senior Member
MotoGP
Joined: Jul 2007
Posts: 5,066
From: NYC
Yeah, no matter what a relay setup will drasticly brighten the light output. Eastern beaver makes great kits Wiring Kits
Administrator
MotoGP
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
Yeah, no matter what a relay setup will drasticly brighten the light output. Eastern beaver makes great kits Wiring Kits
It's common to find a voltage drop at the headlight socket, has been on every bike I have owned, and all my cars, trucks.. BUT this SH I have now.. had full battery voltage at the socket.. .. Strange I know, but I have to wounder what other SH are like?
Senior Member
Superstock
Joined: Jul 2013
Posts: 458
From: Rome, GA
I read it as we are charging you more for an inferior product but we are coming up with a good story to make you think your getting something better
Senior Member
MotoGP
Joined: Jul 2007
Posts: 5,066
From: NYC
But voltage reading is not the whole story. Its wire resistance under load (or something like that)
Same reason my cheap crappy jumper cables failed to jump start my buddies truck but my good thick ones turned it right over.
Also the same reason battery voltage is a half truth. Thats why load testers put it under load of a heating element.
The huge, low resistance lines of the relay system means much brighter light from the same bulb. I noticed a substantial difference and I am a real sceptic.
Same reason my cheap crappy jumper cables failed to jump start my buddies truck but my good thick ones turned it right over.
Also the same reason battery voltage is a half truth. Thats why load testers put it under load of a heating element.
The huge, low resistance lines of the relay system means much brighter light from the same bulb. I noticed a substantial difference and I am a real sceptic.
Administrator
MotoGP
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
But voltage reading is not the whole story. Its wire resistance under load (or something like that)
Same reason my cheap crappy jumper cables failed to jump start my buddies truck but my good thick ones turned it right over.
Also the same reason battery voltage is a half truth. Thats why load testers put it under load of a heating element.
The huge, low resistance lines of the relay system means much brighter light from the same bulb. I noticed a substantial difference and I am a real sceptic.
Same reason my cheap crappy jumper cables failed to jump start my buddies truck but my good thick ones turned it right over.
Also the same reason battery voltage is a half truth. Thats why load testers put it under load of a heating element.
The huge, low resistance lines of the relay system means much brighter light from the same bulb. I noticed a substantial difference and I am a real sceptic.
At 12-14.8vdc .. and only 60 watts being drawn.. unless something is wrong with the wiring (which will show up in the other two tests) ,, pulling 60 watts is not going to cause significant increase in resistance.
But hey, Im just some guy on the internet,,,,, And BTW, Im not saying yours, his, most SH will not benefit from a headlight relay system, all but one of my bikes, cars, trucks did in the last few dozen years... Im just saying,, Check before you spend time and money... it's easy, and should be done before and after the install anyway...
Last edited by E.Marquez; Jan 18, 2014 at 06:17 AM.
Thread
Thread Starter
Forum
Replies
Last Post
