Need some help guys
Have a rc51 f/end,and due to the steep prices for a wheel to suit
I have opted for a cbr 1000rr wheel,so what mods are required
Do I contact allballs and give them the measurements,and go from there
Any help would be appreciated


cheers

 

You should be able to just contact all-***** or a good local bearing house should be able to help....

You just need a wheel bearing with a 22mm I.D. and you should be good to go

Also the front bearing for a CBR is a 6005 Which is 25X47X12
The RC has a 22mm axel so see if you can find a 22X47X12 somewhere local and you should be good to go.....

Also you can't just use RC51 bearing as those are 22X47X14......

 

Also, 'cus it's always fun to spend someone elses money.....

If you contact a local source, you might also want to ask what a set of ceramic bearings would run.

The price on them has been coming down to where they are fairly reasonable to anyone not just the OCMD club.....