anyone heard from truckinduc ?
#61
#62
#63
Last edited by nath981; 05-27-2009 at 11:30 AM.
#65
Im here now. New modem seems to have done the trick.
I Know everyone is upset with me and I understand.
I was going upstairs using my fathers comp, but getting up stairs is not easy.
As for not replying, I have no excuse. When I have 400 emails about this stuff i simply get overwhelmed.
I need to ask a favor. If you have paid for a product and not received it, please tell me what it is and what color IN THIS THREAD. I understand You should not have to do this, but I simply cannot sift through 400 emails without overlooking some.
I have the fork braces cut out, and the first prototype one on my bike. I have to set up a time to have them milled with a milling machine.
Ill take pics and post them so you guys know iM not messing with you. Im aaa little weary of using machinery while on pain killers but you got to do what you got to do.
I am truly sorry, and I want to make this right.
I Know everyone is upset with me and I understand.
I was going upstairs using my fathers comp, but getting up stairs is not easy.
As for not replying, I have no excuse. When I have 400 emails about this stuff i simply get overwhelmed.
I need to ask a favor. If you have paid for a product and not received it, please tell me what it is and what color IN THIS THREAD. I understand You should not have to do this, but I simply cannot sift through 400 emails without overlooking some.
I have the fork braces cut out, and the first prototype one on my bike. I have to set up a time to have them milled with a milling machine.
Ill take pics and post them so you guys know iM not messing with you. Im aaa little weary of using machinery while on pain killers but you got to do what you got to do.
I am truly sorry, and I want to make this right.
#68
Sent a paypal payment for a fork brace in satin black on 5/02...
With a few exceptions, I don't think the majority is in a big rush for their CCTs & fork braces...we just wanted you to provide a response to all the queries, you've done that and all is good...take your time and don't lose and fingers operating machinery while drugged up...
BTW, your bike turned out awesome, how does it run?
With a few exceptions, I don't think the majority is in a big rush for their CCTs & fork braces...we just wanted you to provide a response to all the queries, you've done that and all is good...take your time and don't lose and fingers operating machinery while drugged up...
BTW, your bike turned out awesome, how does it run?
#69
ok, one thing I have learned, DONT trust a computer with important info, like who has paid and shipping addresses, Cause computers CRASH. Im writing every thing down in a notebook now. Im just a stupid 20yo kid with no experience selling things, so I apologize to the people that have to deal with me.
the bike Idles, but I need to sync the carbs, and tune it generally for the airbox. Its sad it has not gotten any attention the last few days. I had 5 friends over here finishing it for me. I sat there telling them what to do, bleeding the brakes, stuff like that. Felt odd.
Here are the braces awaiting milling.
the bike Idles, but I need to sync the carbs, and tune it generally for the airbox. Its sad it has not gotten any attention the last few days. I had 5 friends over here finishing it for me. I sat there telling them what to do, bleeding the brakes, stuff like that. Felt odd.
Here are the braces awaiting milling.
#70
Glad you're back and want to get everything squared away. I sent you a check on 4/3 for a set of satin black CCT's. Make this right and you will have an order for a fork brace.
BTW, your bike looks friggin awesome!
BTW, your bike looks friggin awesome!
#73
Despite huge odds, enthusiasts are hard to discourage. That's a good thing and in today's world it is an unusual thing. Welcome to the real world of computers. They're like girlfriends - have more than one. Welcome to the world of Superhawk - now you know what kind of stuff friends that stick together are made of. Welcome back!
#79
I'm glad you're back too. I was worried you were going to get your other leg broken by one of these pissed off campers, and then hawkrider would have to take out a third mortgage on his house to put you back together again. Hope you enjoyed your vacation cause you sure stirred up the troops.
Last edited by nath981; 05-27-2009 at 09:36 PM.
#80
nath981,
Finished the bolt swap on the end of the tensioner but its too late to fire up the hawk and let it idle. Will test tomorrow. also, in my crusade to make sure i got the lock nut tight enough i caved in the washer that was on the original bolt slightly. is this going to be a problem? I tightened the bolt with my fingers until it stopped and thats it. I put just a tiny bit of finger pressure on it at that point but nothing much at all. Will report tomorrow.
Finished the bolt swap on the end of the tensioner but its too late to fire up the hawk and let it idle. Will test tomorrow. also, in my crusade to make sure i got the lock nut tight enough i caved in the washer that was on the original bolt slightly. is this going to be a problem? I tightened the bolt with my fingers until it stopped and thats it. I put just a tiny bit of finger pressure on it at that point but nothing much at all. Will report tomorrow.
#83
Seems like most of the people paid thru paypal. They would have names and addresses of anyone who paid, and what date they paid.
ok, one thing I have learned, DONT trust a computer with important info, like who has paid and shipping addresses, Cause computers CRASH. Im writing every thing down in a notebook now. Im just a stupid 20yo kid with no experience selling things, so I apologize to the people that have to deal with me.
the bike Idles, but I need to sync the carbs, and tune it generally for the airbox. Its sad it has not gotten any attention the last few days. I had 5 friends over here finishing it for me. I sat there telling them what to do, bleeding the brakes, stuff like that. Felt odd.
Here are the braces awaiting milling.
the bike Idles, but I need to sync the carbs, and tune it generally for the airbox. Its sad it has not gotten any attention the last few days. I had 5 friends over here finishing it for me. I sat there telling them what to do, bleeding the brakes, stuff like that. Felt odd.
Here are the braces awaiting milling.
#86
Thread
Thread Starter
Forum
Replies
Last Post
V-Raptor
Modifications - Performance
4
06-10-2008 08:11 PM