900rr or 954rr swing arm?
Is this Craig's List swing arm a good donor for a VTR brace mod?
It looks to me as if it is from a CBR900rr. The seller identifies it as : CBR 929 Swing arm and wheel W/brakes http://sfbay.craigslist.org/eby/mpo/5040132975.html I would like to do the swing arm brace mod some day. Would it be an advantage to have the whole assembly (wheel caliper etc) as he is selling? |
Originally Posted by Hangfly
(Post 386586)
Is Craig's List swing arm a good donor for a VTR brace mod?
What model does this look like? The seller identifies it as : CBR 929 Swing arm and wheel W/brakes Hmm. working on the image. Well here is a link to the ad: PARTS! PARTS! PARTS! If I do this mod later, is it an advantage to have the whole assembly as he is selling? BUT that is not a 929 swing arm from what i can see in the pic. And it does look like the 900rr swing arm I bought and used for my brace mod. |
I agree that that looks like a 900RR swingarm, but I think it is the later year version with the twin legs or twin spars rather than the single leg version most use. See Eric's brace thread here for more info:
https://www.superhawkforum.com/forum...r-mount-31513/ I'm going to use the twin leg version myself. Jack Flash used the twin leg and has a thread on here about it. The 900rr wheel is a bolt-on if you intend to go 6-spoke. |
Thank you for taking a look at it and commenting.
Yes, it could be junk,(CL is buyer beware, right) but it looked like a brace donor. Not sure if I will ever want the wheel though. Unless I want the "more spokes" look. But that would depend on what I end up with on the front I suppose. |
Well, if you don't want the wheel, you can get a swinger for a lot less. I paid about $20 shipped from the 'bay.
|
Wow. That is pretty amazingly cheap.
I will keep looking. |
Sorry, I checked, it was $30 shipped.
|
If you need somebody in the bay area to weld it up for you let me know and I'll dig up the info for you.... he is the guy who did mine for me ;)
|
Thank you much. I may be calling upon you for that.
I should hold off on this since I already have some front end parts on the way which should keep me "mod" occupied for a while.
Originally Posted by 8541Hawk
(Post 386595)
If you need somebody in the bay area to weld it up for you let me know and I'll dig up the info for you.... he is the guy who did mine for me ;)
|
Classic OCMD in denial right there.
|
Originally Posted by 8541Hawk
(Post 386595)
If you need somebody in the bay area to weld it up for you let me know and I'll dig up the info for you.... he is the guy who did mine for me ;)
|
Denial: ...also used for a psychological defense mechanism postulated by psychoanalyst Sigmund Freud, in which a person is faced with a fact that is too uncomfortable to accept and rejects it instead, insisting that it is not true despite what may be overwhelming evidence.[1][2][3]
Yeah no kidding! Why am I doing this? It takes time away from productive things and will never pay $ returns. I'm going to quit today........Nah.:)
Originally Posted by VTR1000F
(Post 386598)
Classic OCMD in denial right there.
|
Originally Posted by ren
(Post 386600)
I actually have one ready as well to compliment the Ohlins I had put on early April and was going to ask you where you had yours done, hoped it was semi local to LA
|
Originally Posted by 8541Hawk
(Post 386610)
I have some guys around here that should be able to do the job but I was living in the bay area when I had mine done. ;)
Also I'm about to hit 50k! (not all me of course, but about half of your machine haha) |
Do the brace and you will enter a whole new world of OCMD!
|
Originally Posted by VTR1000F
(Post 386588)
I'm going to use the twin leg version myself.
I see a unicorn in my back yard.... |
So if i found a 929rr swing arm on cl for 60 bucks i should buy it then?
|
I have two 929 swingarms and a 929 rear wheel. Didn't know it was a possible brace donor for the VTR. If so I'll list them here for sale.
|
Originally Posted by bewsted
(Post 386927)
So if i found a 929rr swing arm on cl for 60 bucks i should buy it then?
|
I vote vfr sssa
|
Originally Posted by AleksV
(Post 386939)
I vote vfr sssa
|
Honda VFR, Single Side Swing Arm conversion
|
1 Attachment(s)
Originally Posted by AleksV
(Post 386967)
Honda VFR, Single Side Swing Arm conversion
For those types this is a awesome option.. Brace AND stretched AND you get better adjusters... :lol: https://www.superhawkforum.com/forum...1&d=1433536958 |
Originally Posted by CruxGNZ
(Post 386965)
For what?
http://i282.photobucket.com/albums/k...08/VTRSIDE.jpg http://i282.photobucket.com/albums/k...8/P1220779.jpg |
Sorry for the derailment Hangfly, it looks soo good though!
http://www.southbayriders.com/forums/attachments/6633/ |
Originally Posted by AleksV
(Post 386967)
Honda VFR, Single Side Swing Arm conversion
|
oh my bad, didn't read much, I thought he just wanted some cosmetic mods. carry on
|
|
"Sorry for the derailment Hangfly, it looks soo good though!".
That kind of derailment is welcome. I agree that treatment looks sweet.! |
A more elegant looking solution than factory!
Originally Posted by Wolverine
(Post 386984)
|
All times are GMT -7. The time now is 09:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands