WTB Shift pedal
05-23-2008, 08:21 PM
#1
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
WTB Shift pedal
As the title says...
-Brian
-Brian
Last edited by Scumbag; 05-27-2008 at 07:41 PM.
05-26-2008, 08:38 PM
#2
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
biggity bump?
05-26-2008, 09:07 PM
#3
I could ride in
SuperBike
Join Date: Sep 2007
Location: Dayton, TN
Posts: 1,729
bumpity pedal bump
05-26-2008, 10:12 PM
#4
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
It almost gave me a degree in english, so sometimes I like to rape it because of all the papers it had me write. One year left then no more school and no more english bending me over and doing things to me. Please understand my colorful usage and interweb lexicon. 
So...about the shiggity shifter?
So...about the shiggity shifter?
05-27-2008, 04:37 PM
#5
Administrator
World Champion
Join Date: Dec 2004
Location: Fulton, MO
Posts: 105,287
Did you break the nib off of it? You can do what I did for about 2 years and drilled/tapped a hole and used a bolt with the stock rubber. Worked great until the wife went down and broke it off too!
05-27-2008, 05:41 PM
#6
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
I cant even find the broken one!
05-27-2008, 06:03 PM
#7
medium fast guy
Back Marker
Join Date: May 2008
Location: western MI, rust & pot hole capital of the world
Posts: 212
I have one that could be reworked. PM me and we'll see if it will work for you.
05-27-2008, 07:41 PM
#8
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
I would love to find a good one but I will let you know whats up...also I seem to have double tapped the "d" in pedal and used an "e"
05-27-2008, 07:54 PM
#10
Administrator
World Champion
Join Date: Dec 2004
Location: Fulton, MO
Posts: 105,287
Thread Jacker! 
Yeah, you could've gone far with that one, eh?
Yeah, you could've gone far with that one, eh?
05-27-2008, 07:55 PM
#11
Administrator
World Champion
Join Date: Dec 2004
Location: Fulton, MO
Posts: 105,287
06-01-2008, 04:04 PM
#12
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
Anyone?....this is the last thing holding me back from having a running bike
06-03-2008, 01:07 PM
#13
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
Cmon yall...anyone?...I am getting close and would love to be able to shift
Last edited by Scumbag; 06-03-2008 at 01:09 PM.
06-03-2008, 01:45 PM
#14
pragmatic anarchist
Superstock
Join Date: Mar 2008
Location: Philadelphia, PA
Posts: 380
your picture really got to me...I ALMOST took my reworked (tapped and bolted without the original rubber) shifter off and sent it to you so you could ride. Maybe just put it in second gear and go. Lesson here...NEVER throw anything away!
06-03-2008, 01:46 PM
#15
pragmatic anarchist
Superstock
Join Date: Mar 2008
Location: Philadelphia, PA
Posts: 380
oh, one more thing, if you cobble something together with vice grips don't **** up your splines.
06-03-2008, 01:55 PM
#16
The Hypno-Toad
Superstock
Superstock
Join Date: Jun 2006
Location: Milwaukee, WI
Posts: 467
Ahh, the number one broken part on a hawk. Mines bent and at first I looked for a new one, but it turns out we all went down on the same side. It turns out it was easier to adapt to the remaining slight bend in mine.
I'm assuming you already check fleabay. I've had bids out on shift levers, but someone always wants a beat up used shift lever more than me.
I'm assuming you already check fleabay. I've had bids out on shift levers, but someone always wants a beat up used shift lever more than me.
06-03-2008, 02:12 PM
#17
Senior Member
Back Marker
Join Date: Jun 2007
Location: Greenwood, IN
Posts: 122
These things are almost $90?!?!?!?!?!?!? That is rediculous. Are they that different from other bikes? Haven't looked closely at other bikes personally.
06-03-2008, 05:11 PM
#18
Senior Member
SuperSport
Join Date: Nov 2007
Location: Hamilton, Ontario, Canada
Posts: 807
A 94 VFR750 lever fits. It's about $30. You lose the linkage and get a reversed shift pattern.
06-03-2008, 06:22 PM
#19
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
Kinda dig my regular shift pattern...but I will keep that in mind
06-03-2008, 06:53 PM
#20
pragmatic anarchist
Superstock
Join Date: Mar 2008
Location: Philadelphia, PA
Posts: 380
vice grips on shaft give reverse pattern too, but most people consider them temporary.
06-06-2008, 12:33 PM
#21
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
Still looking for one! Help a guy out.
06-06-2008, 02:12 PM
#22
Senior Member
Back Marker
Join Date: May 2008
Location: Garden Grove, Ca.
Posts: 204
I think I might be able to assist. The part with the rubber is bent back along the shaft but I think I can bend it back out. I did that with the foot brake arm and it went back no problem when done very easy. I will let you know Saturday how I make out.
06-06-2008, 02:55 PM
#23
Administrator
World Champion
Join Date: Dec 2004
Location: Fulton, MO
Posts: 105,287
Use heat to bend it back or it will most likely break.
06-06-2008, 04:08 PM
#24
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
they are brittle *******...
06-07-2008, 02:45 PM
#25
Senior Member
Back Marker
Join Date: May 2008
Location: Garden Grove, Ca.
Posts: 204
Yeah it broke. Stupid *** designers. Making it out of white metal.
06-08-2008, 04:15 AM
#26
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
I commend your for trying...****....
Anyone with a legit one?
I painted today...So close...cmon...sell me the one off your bird!!! hahah
Anyone with a legit one?
I painted today...So close...cmon...sell me the one off your bird!!! hahah
06-10-2008, 07:01 PM
#27
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
GIGGITY GOO?
Anyone?...I just painted and its the last thing I need to buy!
Anyone?...I just painted and its the last thing I need to buy!
06-13-2008, 09:37 AM
#28
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
...and I say again with waining hopes...bump?
06-14-2008, 10:09 PM
#29
mildly retarded
SuperBike
Join Date: Mar 2008
Location: Denver, CO
Posts: 1,278
what does 'bump' mean? i see in in many threads...
06-15-2008, 03:15 AM
#30
Senior Member
Superstock
Thread Starter
Join Date: Nov 2005
Location: Seattle, WA
Posts: 379
It means..."sell me the shifter off your own bike"!!!
but really it just puts the thread up to the top of the queue.
but really it just puts the thread up to the top of the queue.
