For the gas tank in question
item: 61104-422-000 - collar
item: 84703-425-000 - rubber
item: 90525-428-900 - washer
item: 96001-06028-07 - bolt

90087-KT7-000 ( Thank you xeris ) crankshaft hole cap part number - I look at left crank case cover on the website, and other but can't seem to find it.

I am also looking for one of the mirrors ( will take a pair if necessary )
MIRROR ASSY., R. BACK
88110-MBB-000


46500-MBB-D60 rear brake pedal

But if anyone has these I am interested in purchasing them!

Still have to go through to see if I have all of the hardware for the fenders, etc... But if anyone is parting one out and has the above stuff then I'd be interested in the other hardware too.

 

Number 10?
https://www.ronayers.com/oemparts/a/...250/alternator

 

Yes, that is it!! 90087-KT7-000

Thank you!

Mine is partially stripped.. I tapped a socket into it to try and get it loose but it will not budge. I'm probably going to have to chisel out a path to make sure it seats all the way and if it still doesn't budge then apply heat to the outside and get some canned air to apply cold to it. Apparently it is a common problem - I won't be torqueing it to spec in the future - under by a little bit.

 

I thought i was gonna get info on how to bypass ignition so i can use my bike after losing the keys but i ended up just getting a bunch of unrelated bs.

 

Recognizing English isn't your first language, the purpose of this conversation thread is a member wanting to buy some parts. If you have a specific question, you may initiate your own conversation to ask your question and solicit an answer.