When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For Sale: WebCam Custom Racing Cams for VTR1000F with WebCam Racing-recommended Kibble-White High-Performance Valve Springs Included. Excellent deal on cams that have only 129 miles of low-RPM wear that occurred during initial stage of engine break-in. WebCam Racing Cams Part Number PN-2610.
Excellent price of $300 plus $30 shipping (lower 48 states) for all four cams and a full set of high-performance Kibble-White VTR1000F valve springs. I paid $829 plus $40 shipping in 2017. (See image of invoice below. NOTE: Shipping costs were not listed in the initial invoice that is pictured below, as shipping to the engine-builder had not yet occurred.)
Payment by PayPal. Please PM me on the SuperHawk Forum to make payment arrangements. Items will be shipped when PayPal funds are transferred successfully. USPS Tracking Number will be forwarded via e-mail when items are shipped.
[***NOTE: These cams should not be installed by a novice mechanic, since installing custom racing cams requires meticulous attention to detail and precise valve-clearance settings and measurements. They should be installed by a mechanic experienced at building engines. The person buying the cams is responsible for seeing that they are properly installed by a qualified motorcycle mechanic. Also, please note that adding high-compression pistons at the same time can complicate cam installation considerably, so WebCam Racing installation instructions must be followed diligently.***]
I bought these custom cams for a recent engine-build, and they turned-out to be too aggressive to be practical for everyday street use, since my VTR is my primary means of transportation: These racing cams are more suitable for track use. (I live in Florida, where sand and oil-on-fresh-rain are a fairly constant issue. For safety and practicality, I thus decided instead to remove the cams and go with stock cams, married to Ferrea titanium valves and JE high-compression pistons.)
These cams would make an excellent addition to a weekend warrior track bike project: They are aggressive, with plenty of acceleration at the right places. WebCam Racing "Time Card" and other WebCam Racing instructions included.
Streaks on cams are from WebCam Racing cam break-in compound removing Dicronite dry-lube coating applied to cam lobes
Do you have specs on the cams?
If so please post them
"Racing"
"Stage IVIII"
Is really not helpful when talking about aftermarket cams..
Same with "10%" more statements and the like when the more than Xxx base numbers are not provided.
Your price is fair and WEB cams is a trusted source
Do you have specs on the cams?
If so please post them
"Racing"
"Stage IVIII"
Is really not helpful when talking about aftermarket cams..
Same with "10%" more statements and the like when the more than Xxx base numbers are not provided.
Your price is fair and WEB cams is a trusted source
GLWTS
The WebCam Racing Cams are the in-house custom-grind. The WebCam Grind Number is 195/493. Detailed specs. are listed in the attached "Time Card" PDF file (from WebCam Racing).
The WebCam Racing Cams are the in-house custom-grind, as designed in 2003 by a former HRC engine builder. The WebCam Grind Number is 195/493. Detailed specs. are listed in the attached "Time Card" PDF file (from WebCam Racing).
WebCam Racing uses OEM cams which they mount into a fixture and then alter by way of a programmed CNC-welding machine that uses fiber-optics to measure cam symmetry. This allows them to create new cam lobe symmetry on the OEM cams. Before they were sent to WebCam Racing for processing, the cams--including gears--were removed from a stock VTR engine with only 31,000 miles on it. The stock gears show very little wear, since the VTR from which they were removed was well-maintained, a real "garage queen."
No, I haven't sold the VTR cams yet; they are still for sale. If you are interested in the custom cams, send a PM, and I can send a PayPal link to your e-mail address for a payment due of $300 plus $30 shipping.
Hey, buuuuudy...... I'm about to do a Chicken build and I would like to buy these. Let's do this!
I haven't sold the VTR cams yet; they are still for sale. If you are interested in the custom cams, send a PM, and I can send a PayPal link to your e-mail address for a payment due of $300 plus $30 shipping.
The WebCam Racing Cams have been sold for the asking price. They sold to the first person in the line of several keenly interested individuals on the SuperHawk Forum.
08-23-2018, 10:50 AM
