VTR1000 MORIWAKI HRC RACE PROJECT
VTR1000 MORIWAKI HRC RACE PROJECT
Not mine but an interesting ad.....
http://sfbay.craigslist.org/sfc/mcy/661498027.html
I have for sale a project that has taken me years to find all the rare parts. It started with a 1998 VTR1000F, frame was boxed, swingarm was braced then along with the wheels were Powder coated.Then the best parts were serched for'
HRC Close Ratio Transmission(Coated)
HRC Module
Moriwaki Stage III Cams(Coated)
Moriwaki Oversize stainless valves(coated)
Moriwaki Valve springs
Moriwaki Clutch springs
R&D Titanium retainers
R&D Custom adjustable came sprockets
Flow Commander
New Crank and Rod bearings(coated)
V-Two Pistons(Coated)
Custon Par covers
Moriwaki, Factory, Other jet kits
45mm CBR900RR forks with Gold Valves and Race Tech Springs
Ohlins Shock with custon spring
Marchesini magnesium race wheels
Marchesini rear floating disc
Yamaha R6 rear caliper
adjustable rear sets
Two Brothers aluminim full set
Graves fairing mount
Vortex Triple
6 piston Tikiko calipers
EBC Pro-lites
Race Gass with Double Bouble
Heli bars
steel lines
alloy keyless gas cap
frame sliders
rear stand spools
New michelin slicks
Extra sprocket
Extra frame, swingarm, tank, wheels, forks, electrics, engine, transmissions and more
What I am asking is give away. The transmission and module cost as much as I am asking. The Stage III Moriwaki stuff and the coatings brings it up a bunch. The heads need finishing as do a few other odds and ends, hey my loss your gain. Lost the excitement I had when I started this. Just needs to go, out of sight out of mind. Email for more info and pictures.
$5000 OBO.
http://sfbay.craigslist.org/sfc/mcy/661498027.html
I have for sale a project that has taken me years to find all the rare parts. It started with a 1998 VTR1000F, frame was boxed, swingarm was braced then along with the wheels were Powder coated.Then the best parts were serched for'
HRC Close Ratio Transmission(Coated)
HRC Module
Moriwaki Stage III Cams(Coated)
Moriwaki Oversize stainless valves(coated)
Moriwaki Valve springs
Moriwaki Clutch springs
R&D Titanium retainers
R&D Custom adjustable came sprockets
Flow Commander
New Crank and Rod bearings(coated)
V-Two Pistons(Coated)
Custon Par covers
Moriwaki, Factory, Other jet kits
45mm CBR900RR forks with Gold Valves and Race Tech Springs
Ohlins Shock with custon spring
Marchesini magnesium race wheels
Marchesini rear floating disc
Yamaha R6 rear caliper
adjustable rear sets
Two Brothers aluminim full set
Graves fairing mount
Vortex Triple
6 piston Tikiko calipers
EBC Pro-lites
Race Gass with Double Bouble
Heli bars
steel lines
alloy keyless gas cap
frame sliders
rear stand spools
New michelin slicks
Extra sprocket
Extra frame, swingarm, tank, wheels, forks, electrics, engine, transmissions and more
What I am asking is give away. The transmission and module cost as much as I am asking. The Stage III Moriwaki stuff and the coatings brings it up a bunch. The heads need finishing as do a few other odds and ends, hey my loss your gain. Lost the excitement I had when I started this. Just needs to go, out of sight out of mind. Email for more info and pictures.
$5000 OBO.
this bike is on Ebay now. No reserve.
somebody should buy this bike. Lots of unobtainium parts. The transmission was very expensive. I'd toss the exhaust and buy a good one. It would just be a unique collector piece if nothing else. Fun for track days too.
somebody should buy this bike. Lots of unobtainium parts. The transmission was very expensive. I'd toss the exhaust and buy a good one. It would just be a unique collector piece if nothing else. Fun for track days too.
Thread
Thread Starter
Forum
Replies
Last Post
thedeatons
Classifieds
9
Apr 1, 2015 01:49 PM
vtr_pilot
Classifieds
7
Apr 16, 2006 10:31 PM
vtr_pilot
Technical Discussion
5
Apr 4, 2006 08:25 AM







