VTR performance upgrade parts
#1
VTR performance upgrade parts
I bought a highly upgraded VTR recently along with a lot of additional performance parts which I want to offer to the Superhawk Forum first. These parts are as listed below. I will be glad to send detailed photos, if requested.
1.)Pair of Galfer wave rotors; 296mm diameter; model # DF027CW; 5.0083mm thickness vs. 4.2mm min. per Galfer; used approx. 500 miles;
$579 new....yours for $250.
2.)Lightened flywheel by Greg Nemish; 7 lbs.; $100.
3.)Flywheel puller, gaskets, o-rings, keys, etc. req'd for new flywheel installation; all genuine Honda parts(except puller); $76 retail; yours for $40.
4.)Tokico S 6-piston front calipers as used on Hayabusa GSX1300R; used with the Galfer rotors, so approx. 500 miles; $175
See also machined aluminum velocity stacks by A & L Motorsports in a separate posting.
Fair/near offers considered. Thanks.
Bud
1.)Pair of Galfer wave rotors; 296mm diameter; model # DF027CW; 5.0083mm thickness vs. 4.2mm min. per Galfer; used approx. 500 miles;
$579 new....yours for $250.
2.)Lightened flywheel by Greg Nemish; 7 lbs.; $100.
3.)Flywheel puller, gaskets, o-rings, keys, etc. req'd for new flywheel installation; all genuine Honda parts(except puller); $76 retail; yours for $40.
4.)Tokico S 6-piston front calipers as used on Hayabusa GSX1300R; used with the Galfer rotors, so approx. 500 miles; $175
See also machined aluminum velocity stacks by A & L Motorsports in a separate posting.
Fair/near offers considered. Thanks.
Bud
#6
Lightened flywheel for sale
I posted a lightened flywheel for sale on the forum a few days ago. A forum member noted that the 7#'s that I listed didn't take much off of the stock flywheel, which is approx. 7.3lbs. Since the flywheel was lightened by Greg Nemish, who I understand is knowledgeable about performance upgrades on Superhawks, I was puzzled. Having weighed it on my mechanical postal scale, I suspected this may be off, so took it to the post office today. It weighs 6lbs. 10ounces per their more accurate scale. The outside diameter is 141mm. Photos available, if you send me a PM. I tried posting them on this posting, but must be doing something wrong, as they don't attach.
Thanks for your interest.
Thanks for your interest.
#7
I posted a lightened flywheel for sale on the forum a few days ago. A forum member noted that the 7#'s that I listed didn't take much off of the stock flywheel, which is approx. 7.3lbs. Since the flywheel was lightened by Greg Nemish, who I understand is knowledgeable about performance upgrades on Superhawks, I was puzzled. Having weighed it on my mechanical postal scale, I suspected this may be off, so took it to the post office today. It weighs 6lbs. 10ounces per their more accurate scale. The outside diameter is 141mm. Photos available, if you send me a PM. I tried posting them on this posting, but must be doing something wrong, as they don't attach.
Thanks for your interest.
Thanks for your interest.
OEM flywheels on this bike start at about 7lb 5 oz (I just looked at 10 before pics I had) That makes yours for sale aprox. 11 oz lighter
Thread
Thread Starter
Forum
Replies
Last Post
thumper61713
Modifications - Performance
36
01-02-2010 02:32 AM
salmanilla2000
Modifications - Performance
5
08-28-2008 08:44 AM