FOR SALE: CBR1000RR Complete Front End with Apex 3" Risers
#1
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
FOR SALE: CBR1000RR Complete Front End with Apex 3" Risers
Selling my complete 2007 CBR1000RR front end, with Like new All ***** steering stem bearings, including races which came out very easily. The front end was only installed for <200 miles.
Includes the Apex 3" Riser bars($220) I bought for the conversion. In my opinion the best option for this swap. A lot of adjust ability. Minor wear from controls being mounted.
The wheel is in good shape, I only saw two small scratches looked like from putting a tire on. The tire has good tread on it to use for a while.
When I installed the forks the left fork started leaking a little, I have a new set of K&L fork and dust seals I am including in the sale.
The lower triple clamp turn stops were cut off slightly to gain some turn angle.
Price is $1000 shipped in the US. Will most likely be a few boxes, one for the forks, another for the wheel. Maybe a third for the fender depending where I can fit it.
I will also include the aluminum brackets I made to move the radiators back some so the forks don't touch the radiator tube.
Includes the Apex 3" Riser bars($220) I bought for the conversion. In my opinion the best option for this swap. A lot of adjust ability. Minor wear from controls being mounted.
The wheel is in good shape, I only saw two small scratches looked like from putting a tire on. The tire has good tread on it to use for a while.
When I installed the forks the left fork started leaking a little, I have a new set of K&L fork and dust seals I am including in the sale.
The lower triple clamp turn stops were cut off slightly to gain some turn angle.
Price is $1000 shipped in the US. Will most likely be a few boxes, one for the forks, another for the wheel. Maybe a third for the fender depending where I can fit it.
I will also include the aluminum brackets I made to move the radiators back some so the forks don't touch the radiator tube.
#2
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
I'll knock off $100 for a local deal. Maryland/Pennsylvania line in baltimore county.
I can meet someone anywhere between York PA, and Baltimore MD. Or 30 miles or so in any other direction
I know we have a decent amount of members in this area
I can meet someone anywhere between York PA, and Baltimore MD. Or 30 miles or so in any other direction
I know we have a decent amount of members in this area
#3
Ug, I have been searching for this stuff but now is a bad time. I at first thought it was a tad pricey but then saw the apex bars which are great and make it a steal.
I have this exact whole setup on my SSS hawk which has become too nice to ride very often.
I have this exact whole setup on my SSS hawk which has become too nice to ride very often.
#6
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
Hmmmm what do you have? I wouldn't be opposed to a trade, or a partial trade. PM me thing you might want to trade. vehicles, firearms, tools, anything really....
I could look into that for you, maybe we can split shipping if it's really high. What I should do is package it all up so I can get accurate quotes then it will be ready to go.
I could look into that for you, maybe we can split shipping if it's really high. What I should do is package it all up so I can get accurate quotes then it will be ready to go.
#11
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
#12
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
Still have the forks for sale complete from the clip ons to the tire, including custom radiator brackets. If $1000 shipped is too high send me offers.....I need funds to get my bike shop I'm starting this month off the ground...
#13
Senior Member
SuperBike
Join Date: Jul 2011
Location: South of Live Free or Die & North of Family Guy
Posts: 1,456
I can't believe no one took it yet, that is a great deal collectively with all the parts
#14
Thread
Thread Starter
Forum
Replies
Last Post