I just had a friend at church cut and turn this to 1.75" OD by 5mm thick for me. I have enough material to make about 5 more.

They look a bit big in diameter in the picture, but that makes them easy to hold onto during installation & removal.

Sorry if you guys already have a source for these. Just trying to help with some extra material I have laying around....

PM me if you want one and I will send Paypal info.

Please be patient with me on the shipping, each one will be handmade, and I work a lot. I will do my best to ship as soon as I receive the part from the machinist.


Thanks!
James
Caldwell, Idaho

 

How is that a preload spacer? It in no way "preloads" the spring, which is what a preload spacer would do..

It does seem to be a spacer used to raise the rear end of the bike up..
Is that what you meant?

 

deatons, those are great. Dont mind Eric, he just hates when things are misx-stated or mistakes are made.
I wish I had access to those before my engineering debacle when I made mine

 

Yeah sorry guys, I meant ride height spacer.... This has been a tough week, excuse my ignorance.


Thanks for the correction Eric. Your posts have been very valuable to me, and I appreciate your feedback


James

 

Ehh, that makes sense, nicely done.

Was not trying to snooty .... just typed that way.

 

 

Please note these should only be used with an otherwise stock suspension. It makes a bit of an improvement by masking some of the shortcomings of the stock parts. With a proper front and rear setup you should run stock to +3mm shock length max.

 

Hey, just got word from my machinist friend that he is setting up a new shop, and making it a business, so he wants a little more to get these done for me, plus he is a month out.

At this point I could probably get one done in October, but it would be about $20 shipped…

If anyone wants one please let me know.

Thanks!
James