Mirror Extenders Round 2
#1
Mirror Extenders Round 2
Ok guys I've got another 9 sets almost done, final machining and powdercoating still to do. I'm sure some of the guys that got a set on the first round can offer any comments for the new guys that don't know what they are or how they work.
As I said I have 9 sets available so I will let it run like this.....post on this thread that you want a set, paypal payment to pm me for info, if there are 9 posters ahead of you that requested a set then you may be too late. I think I can do 40.00 per set shipped in the Cont. US, any others I will get a shipping quote and send you a total.
As I said I have 9 sets available so I will let it run like this.....post on this thread that you want a set, paypal payment to pm me for info, if there are 9 posters ahead of you that requested a set then you may be too late. I think I can do 40.00 per set shipped in the Cont. US, any others I will get a shipping quote and send you a total.
Last edited by archaicguy; 09-30-2012 at 03:09 PM.
#3
#8
#10
When sending payment please give me your screen name in a comment please. This will allow me to keep track of things better. Thanks
Ok got your payment twist. I should have some ready mid to late next week
Ok got your payment twist. I should have some ready mid to late next week
#11
#14
I recently got a set and couldn't be happier! archaicguy is great to do business with. The extensions look good and provide the extra little bit to see behind yourself and the colour matches so they look as if they are part of the original mirrors. I really like being able to pull my mirrors in if I want to, the cost is right and the money goes to a fellow hawk rider so you get good karma points in the deal.
#19
Just and idea, but if you had a hole drilled down the centre along the shaft (hollowed out) so a there would be a half moon shape on the part the bolt goes through. This would possibly allow for after market mirrors like GSXR to then have the end cut off and and me slotted to fit onto the extenders which would allow for indicator wires to run through and also allow easy attachment of aftermarket mirrors. I'm not sure if the bolt would get in the way but I think a wire could get through either side of the bolt in the half moon part of the drill hole.
(:-})
(:-})
#21
Just and idea, but if you had a hole drilled down the centre along the shaft (hollowed out) so a there would be a half moon shape on the part the bolt goes through. This would possibly allow for after market mirrors like GSXR to then have the end cut off and and me slotted to fit onto the extenders which would allow for indicator wires to run through and also allow easy attachment of aftermarket mirrors. I'm not sure if the bolt would get in the way but I think a wire could get through either side of the bolt in the half moon part of the drill hole.
(:-})
(:-})
#22
I'm not asking for them, (not just yet anyway) I'm just throwing the idea out there for you. It could be an option that a lot of folk would like. It kills two birds with one stone, so to speak. The attachement of aftermarket mirrors which would retain the folding back of the Originals and the running of the wires.
And yes, a through hole to be able to run wires for mirrors with signals.
(:-})
And yes, a through hole to be able to run wires for mirrors with signals.
(:-})
#23
I have GSXR mirrors with turn signals and am redoing my mounting. I want a factory look and these would help make that possible.
If you can make a hole through the center and still keep the price at fourty bucks, that would be great. If not, I understand and please count me in for a pair and I'll throw them on my drill press and try not to scratch 'em up lol
If you can make a hole through the center and still keep the price at fourty bucks, that would be great. If not, I understand and please count me in for a pair and I'll throw them on my drill press and try not to scratch 'em up lol
#24
#27
Someone that wants the through hole please use one of the pics above on this post or off of my first mirror extender post that shows them not installed and draw an arrow or something on the part to show me what would be the ideal location and can someone give me the diameter of the wire that will go through so I know what size hole to drill.
Thanks
Thanks
#28
Lets see if this works...
The hole can be as small as 1/8", but that might be kinda tight. If you can pull off 3/16", that would be perfect.
Obviously you cant drill in the center, because of the bolt, so a little off center would work. Just imagine a couple of 18 gauge wires that need to go from one end to the other amd that's it. Simple.
The hole can be as small as 1/8", but that might be kinda tight. If you can pull off 3/16", that would be perfect.
Obviously you cant drill in the center, because of the bolt, so a little off center would work. Just imagine a couple of 18 gauge wires that need to go from one end to the other amd that's it. Simple.
#30
Ok all sets that have already been paid for are complete and will ship by the end of the week. I have 1 set left and that will probably be the last unless I have quite a few more people interested in some later. If you want the last set pm me