Lower fairing.
#1
Lower fairing.
This came with my bike. It is a Targa fairing. Fiberglass construction. It's not perfect, but some bondo, primer, and paint can fix that. The mounting points are solid. I have the 3 mounting brackets as well. There are scratches, gouges, and a possible repair that was glassed over.
$50+shipping.
$50+shipping.
Last edited by Carolinaboy; 04-17-2013 at 06:05 PM.
#13
Sorry, I should have clarified. I'm looking for something with a 15mm or 5/8" piston size.
I believe the bore on the superhawk is 14mm, which I believe will be too much for my calipers.
I'm looking for something to use on a project with gpz750 calipers.
I believe the bore on the superhawk is 14mm, which I believe will be too much for my calipers.
I'm looking for something to use on a project with gpz750 calipers.
#14
i upgraded my 650 to GPZ calipers and a nice nissin 5/8" master with a brembo resivour, made an incredible difference, and with a 750 motor bored to 810 with GPZ cams and 4-1 kerker i needed the stopping power
check out the link in my sig to see my kz...sadly it left the stable 2 weeks ago but man was it a blast, picked up a 73 cb350F a bit ago and thats my newest project
#15
i upgraded my 650 to GPZ calipers and a nice nissin 5/8" master with a brembo resivour, made an incredible difference, and with a 750 motor bored to 810 with GPZ cams and 4-1 kerker i needed the stopping power
check out the link in my sig to see my kz...sadly it left the stable 2 weeks ago but man was it a blast, picked up a 73 cb350F a bit ago and thats my newest project
check out the link in my sig to see my kz...sadly it left the stable 2 weeks ago but man was it a blast, picked up a 73 cb350F a bit ago and thats my newest project
Thread
Thread Starter
Forum
Replies
Last Post
captainchaos
Classifieds
7
01-09-2013 02:04 PM
mmtro1
Classifieds
34
01-31-2010 12:03 PM
salmanilla2000
Modifications - Cosmetic
3
06-28-2009 10:50 PM