Carb sync relocation kit.
Thread Starter
Senior Member
SuperSport
Joined: Jun 2008
Posts: 916
From: San Diego
Carb sync relocation kit.
Anyone interested in a kit to make vacume ports accessable under the seat for easy carb syncing?
Benefit is that the gas tank does not have to be removed and you don't have to have a spare tank hanging to do the sync.
I could also make up a kit for the guys that have 4 cylinders, but it would not have a bracket to mount as every bike is different.
Benefit is that the gas tank does not have to be removed and you don't have to have a spare tank hanging to do the sync.
I could also make up a kit for the guys that have 4 cylinders, but it would not have a bracket to mount as every bike is different.
Out of my mind, back in 5
MotoGP
Joined: Nov 2006
Posts: 6,109
From: Skurup, Sweden
Actually if you make it a bracket/access point sitting inside the framerail on one of the sides instead of the saddle I'll buy one... I see no point in making the lines unneccesary complicated/long to get in there...
BTW would this be just a bracket, or a more complete solution? The way I usually end up doing stuff I'll likely get around to making myself something sooner or later on my own otherwise, so...
BTW would this be just a bracket, or a more complete solution? The way I usually end up doing stuff I'll likely get around to making myself something sooner or later on my own otherwise, so...
Last edited by Tweety; May 4, 2010 at 03:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
