All my VTR parts for sale: Hoarding relief
#31
#33
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
Sorry I'm all out of mirrors that I'm aware of.. I need 2 for my current build, if I come across more i'll let you know
The fairing stay turns out, is bent near where it bolts to the frame. The round hole cut into the side looks more like pac man now.
The fairing stay turns out, is bent near where it bolts to the frame. The round hole cut into the side looks more like pac man now.
#35
I gathered a lot of parts in the few short years I own my superhawks. I don't have a complete bike anymore so there's no point in keeping all of these parts. All prices are without shipping
Link to the Photobucket Album with all of the pictures.
Moriwaki 11.2:1 compression forged pistons. Used about 16,000 miles. Involved in a CCT failure but took no visible damage. Ran again after valve repair. - $300
**SOLD**CBR1000rr complete front end***SOLD**
Like New OEM Mufflers. Were removed by original PO of one bike I had with very little miles. $180
Front Brakes complete sets. I thought they were both VTR sets but the gold ones are slightly different and they have different Master Cylinders. May need to identify the gold set first. Black set CBR F4I upgrade $75
VTR Carbs, good condition. Adjustable 6 position needles 185/180 main jets, 45s pilot jets. $100
Polished Two Bros Exhaust elbows. SOLD***
OEM VTR Rear Shock $25
VTR? Fans I think they're VTR but not positive. $30
Black leather tank braGood condition. A few small imperfections in the leather. $25
(2) Good OEM Clear Windscreens Left has a few more miles and wear $25. Right is very nice and was in an aftermarket windscreen packaging, I think removed early on. $40
Good Right Radiator. $30 some bent fins. Maybe a core tube with a dent but no leaks.
OEM Lower triple clamp with stem (upper triple has sold) $20
Right clipon with brake Cyl, kill switch Broken lever $25
Instrument cluster with 26,xxxk miles, Clean Very nice condition overall. The speedo glass has 2-3 tiny micro cracks 1mm $125
Fairing stay looks straight. $25
Tail light Good condition $20
Red Front Fender Very clean no damage $30
OEM Airbox $30
Front wheel with rotors and *usable tire $150
Cylinder Heads Good rear head with valves $80. I gotta check the front head to make sure its good
Manual CCT from forum member $50
OEM Rods $40
OEM Cams $60 for the set
OEM Cam Gears $40
Link to the Photobucket Album with all of the pictures.
Moriwaki 11.2:1 compression forged pistons. Used about 16,000 miles. Involved in a CCT failure but took no visible damage. Ran again after valve repair. - $300
**SOLD**CBR1000rr complete front end***SOLD**
Like New OEM Mufflers. Were removed by original PO of one bike I had with very little miles. $180
Front Brakes complete sets. I thought they were both VTR sets but the gold ones are slightly different and they have different Master Cylinders. May need to identify the gold set first. Black set CBR F4I upgrade $75
VTR Carbs, good condition. Adjustable 6 position needles 185/180 main jets, 45s pilot jets. $100
Polished Two Bros Exhaust elbows. SOLD***
OEM VTR Rear Shock $25
VTR? Fans I think they're VTR but not positive. $30
Black leather tank braGood condition. A few small imperfections in the leather. $25
(2) Good OEM Clear Windscreens Left has a few more miles and wear $25. Right is very nice and was in an aftermarket windscreen packaging, I think removed early on. $40
Good Right Radiator. $30 some bent fins. Maybe a core tube with a dent but no leaks.
OEM Lower triple clamp with stem (upper triple has sold) $20
Right clipon with brake Cyl, kill switch Broken lever $25
Instrument cluster with 26,xxxk miles, Clean Very nice condition overall. The speedo glass has 2-3 tiny micro cracks 1mm $125
Fairing stay looks straight. $25
Tail light Good condition $20
Red Front Fender Very clean no damage $30
OEM Airbox $30
Front wheel with rotors and *usable tire $150
Cylinder Heads Good rear head with valves $80. I gotta check the front head to make sure its good
Manual CCT from forum member $50
OEM Rods $40
OEM Cams $60 for the set
OEM Cam Gears $40
#36
Are pistons standard size are they still available & is anyother modification needed bsyds jetting when using these pistons?
#41
Guys this post is from 2013, and the members last visit to the site was Last Activity: 02-01-2016 12:54 AM
Pretty sure you have a long wait for a response..
By all means send him a PM, it might get noticed..
Pretty sure you have a long wait for a response..
By all means send him a PM, it might get noticed..
Thread
Thread Starter
Forum
Replies
Last Post