All my VTR parts for sale: Hoarding relief
I gathered a lot of parts in the few short years I own my superhawks. I don't have a complete bike anymore so there's no point in keeping all of these parts. All prices are without shipping
Link to the Photobucket Album with all of the pictures. Moriwaki 11.2:1 compression forged pistons. Used about 16,000 miles. Involved in a CCT failure but took no visible damage. Ran again after valve repair. - $300 **SOLD**CBR1000rr complete front end***SOLD** Like New OEM Mufflers. Were removed by original PO of one bike I had with very little miles. $180 Front Brakes complete sets. I thought they were both VTR sets but the gold ones are slightly different and they have different Master Cylinders. May need to identify the gold set first. Black set CBR F4I upgrade $75 VTR Carbs, good condition. Adjustable 6 position needles 185/180 main jets, 45s pilot jets. $100 Polished Two Bros Exhaust elbows. SOLD*** OEM VTR Rear Shock $25 VTR? Fans I think they're VTR but not positive. $30 Black leather tank braGood condition. A few small imperfections in the leather. $25 (1) Good OEM Clear Windscreens Left has a few more miles and wear $25. Right is SOLD Good Right Radiator. $30 some bent fins. Maybe a core tube with a dent but no leaks. OEM Lower triple clamp with stem (upper triple has sold) $20 Right clipon with brake Cyl, kill switch Broken lever $25 Instrument cluster with 26,xxxk miles, Clean Very nice condition overall. The speedo glass has 2-3 tiny micro cracks 1mm $125 Fairing stay looks straight. $25 Tail light Good condition $20 Red Front Fender Very clean no damage $30 OEM Airbox $30 Front wheel with rotors and *usable tire $150 Cylinder Heads Good rear head with valves $80. I gotta check the front head to make sure its good Manual CCT from forum member keeping for current bike rebuild OEM Rods $40 OEM Cams $60 for the set OEM Cam Gears $40 |
Cbr1000 front end sold this afternoon
Polished two bros pipes sold pending payment |
I'd go for the Two Brothers exhaust elbows if you can tell me what the diameter of the pipe is where it connects to the cans?
& the black calipers in the photobucket link appear to be F4i calipers & master cylinder. Price and shipping to Toronto Ontario Canada, thanks -Matt |
Aloha,
If matt365 does not take the two bros elbows I may be interested. Please P.M. me. Mahalo. |
Dibs on the Red front fairing .
Any pics ? |
I need full fairing, left hand radiator, gear shifter lever, and left foot stay assembly
|
ha, I just looked at pics, I'll take left radiator
|
Sent PM for:
OEM Triples with stem and ignition(no key) $25 |
Originally Posted by matt365
(Post 363704)
I'd go for the Two Brothers exhaust elbows if you can tell me what the diameter of the pipe is where it connects to the cans?
& the black calipers in the photobucket link appear to be F4i calipers & master cylinder. Price and shipping to Toronto Ontario Canada, thanks -Matt
Originally Posted by Onomea
(Post 363711)
Aloha,
If matt365 does not take the two bros elbows I may be interested. Please P.M. me. Mahalo.
Originally Posted by lloydievtr
(Post 363714)
Dibs on the Red front fairing .
Any pics ?
Originally Posted by whatthefnck
(Post 363723)
I need full fairing, left hand radiator, gear shifter lever, and left foot stay assembly
Originally Posted by wizzardofboz
(Post 363781)
Sent PM for:
OEM Triples with stem and ignition(no key) $25 I do have more smaller items if there's something you need and don't see just ask.. I know I have some coils, a wire harness, OEM header, electronics like the Ignition box, starter solenoid, maybe a Regulator |
Good evening.
I am interested in your stock exhaust and the air box. Please advise if still available. Thanks. Mike mkoevenig@charter.net |
Originally Posted by Mike K.
(Post 363861)
Good evening.
I am interested in your stock exhaust and the air box. Please advise if still available. Thanks. Mike mkoevenig@charter.net |
Call Dibs on the OEM mufflers.. Could you check your PMs, Thank you..
|
Originally Posted by whatthefnck
(Post 363723)
I need full fairing, left hand radiator, gear shifter lever, and left foot stay assembly
|
top triple received, Thanks
|
On the guage cluster, does the tach work? And how much for it?
|
Originally Posted by jagg1174
(Post 364017)
On the guage cluster, does the tach work? And how much for it?
|
I PMd you about the front stay on Wednesday. still available?
|
have a starter by chance?
|
Is the front fender still available? How much shipped to 66221?
|
Did you get a chance to check that front head? Is it good and complete? I'm interested. Shipping to 61254? Thanks.
|
I was out camping in WV Wed-Sat, I'll start replying to questions with PM's today.
|
Gear shifter available?
|
Originally Posted by jaconrad15
(Post 364525)
Gear shifter available?
|
Originally Posted by 98VTRrider
(Post 364527)
I sold the only one I had. I haven't seen any others, but if I come across one Ill let you know.
|
Originally Posted by hv996
(Post 364454)
I PMd you about the front stay on Wednesday. still available?
Originally Posted by Shane702
(Post 364460)
have a starter by chance?
Originally Posted by SpeedieGTI
(Post 364480)
Is the front fender still available? How much shipped to 66221?
Originally Posted by VTR1000F
(Post 364485)
Did you get a chance to check that front head? Is it good and complete? I'm interested. Shipping to 61254? Thanks.
|
Originally Posted by 98VTRrider
(Post 363648)
I gathered a lot of parts in the few short years I own my superhawks. I don't have a complete bike anymore so there's no point in keeping all of these parts. All prices are without shipping
Link to the Photobucket Album with all of the pictures. Moriwaki 11.2:1 compression forged pistons. Used about 16,000 miles. Involved in a CCT failure but took no visible damage. Ran again after valve repair. - $300 **SOLD**CBR1000rr complete front end***SOLD** Like New OEM Mufflers. Were removed by original PO of one bike I had with very little miles. $180 Front Brakes complete sets. I thought they were both VTR sets but the gold ones are slightly different and they have different Master Cylinders. May need to identify the gold set first. Black set CBR F4I upgrade $75 VTR Carbs, good condition. Adjustable 6 position needles 185/180 main jets, 45s pilot jets. $100 Polished Two Bros Exhaust elbows. SOLD*** OEM VTR Rear Shock $25 VTR? Fans I think they're VTR but not positive. $30 Black leather tank braGood condition. A few small imperfections in the leather. $25 (2) Good OEM Clear Windscreens Left has a few more miles and wear $25. Right is very nice and was in an aftermarket windscreen packaging, I think removed early on. $40 Good Right Radiator. $30 some bent fins. Maybe a core tube with a dent but no leaks. OEM Lower triple clamp with stem (upper triple has sold) $20 Right clipon with brake Cyl, kill switch Broken lever $25 Instrument cluster with 26,xxxk miles, Clean Very nice condition overall. The speedo glass has 2-3 tiny micro cracks 1mm $125 Fairing stay looks straight. $25 Tail light Good condition $20 Red Front Fender Very clean no damage $30 OEM Airbox $30 Front wheel with rotors and *usable tire $150 Cylinder Heads Good rear head with valves $80. I gotta check the front head to make sure its good Manual CCT from forum member $50 OEM Rods $40 Are carbs still 4sale? OEM Cams $60 for the set OEM Cam Gears $40 |
Are the carbs still 4sale???
|
ATTENTION! Parts are being sold more selectively now.. I just bought a project VTR last night that I don't know what parts I may be needing yet...electrical issue needs sorted.
Originally Posted by VTR1000Denver
(Post 364696)
Are the carbs still 4sale???
|
i need the frame under the seatthat the tail light fastens to and holds the seat on. i don't know what it's called.
|
Originally Posted by 99superhawk_Dom
(Post 364808)
i need the frame under the seatthat the tail light fastens to and holds the seat on. i don't know what it's called.
|
All times are GMT -7. The time now is 05:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands