what are these things?
#5
https://www.superhawkforum.com/forums/attachments/technical-discussion-28/13398d1329827246-what-these-things-imag0577-jpg
Something is printed on the plastic,, Name?
Id guess a set of gadget mounts, or mounts for a wind screen.
Something is printed on the plastic,, Name?
Id guess a set of gadget mounts, or mounts for a wind screen.
#6
True about the lettering...I'll try to get close ups maybe...
Radar mounts...that would be kewl since its a cold day in hell that I drive 55 lol...
Be what kina windscreen would fit in there? Thought it was mounted to one? Wtf? Lol
Radar mounts...that would be kewl since its a cold day in hell that I drive 55 lol...
Be what kina windscreen would fit in there? Thought it was mounted to one? Wtf? Lol
#8
#14
Specifically these: http://www.saeng.com/product.php?product_pk1=539
Last edited by rz_racer_69; 02-21-2012 at 04:02 PM.
#19
Those mounts are a bitch to get off. They were on my Bandit when I bought it too. I used a blowdryer to heat the glue up real good and used a knife to get one edge lifting up and they slowly peeled off. Be very careful and you won't scratch your windscreen.
"Can the system be moved or permanently removed?
Yes... base units (the part attached to the vehicle) are tape mounted and can be removed. It is best to do this when they are warm. Park in the sun or lightly preheat them with a hairdryer. When the bases are warm, peel them off by starting at a corner. If you must use a tool to start peeling an edged, use a smooth edged tool and be careful not to scratch the vehicle. Replacement bases are available for remounting or repositioning and are listed in the Parts and Accessories link of the particular model page. The tape is applied here at the factory using a special tape enhancer and is sold only as a taped base set."
"Can the system be moved or permanently removed?
Yes... base units (the part attached to the vehicle) are tape mounted and can be removed. It is best to do this when they are warm. Park in the sun or lightly preheat them with a hairdryer. When the bases are warm, peel them off by starting at a corner. If you must use a tool to start peeling an edged, use a smooth edged tool and be careful not to scratch the vehicle. Replacement bases are available for remounting or repositioning and are listed in the Parts and Accessories link of the particular model page. The tape is applied here at the factory using a special tape enhancer and is sold only as a taped base set."
#23
old here's the new style.
VTR1000 (1997-2005) | HeliBars
VTR1000 (1997-2005) | HeliBars
#26
Thread
Thread Starter
Forum
Replies
Last Post