Technical Discussion Topics related to Technical Issues

So.....

Old May 22, 2013 | 09:25 PM
  #1  
Mrredline05's Avatar
Thread Starter
Member
Squid
 
Joined: May 2013
Posts: 61
From: Oak Harbor, WA
Mrredline05 is on a distinguished road
So.....

does anyone else's taillight stay lit all the time or is it just mine?
Old May 22, 2013 | 09:56 PM
  #2  
CruxGNZ's Avatar
Rex Kramer-Thrill Seeker
SuperBike
 
Joined: Jan 2011
Posts: 2,312
From: Brookfield, WI
CruxGNZ is on a distinguished road
You kidding?

It's the running light. Every motorcycle made has this.
Old May 22, 2013 | 10:05 PM
  #3  
Mrredline05's Avatar
Thread Starter
Member
Squid
 
Joined: May 2013
Posts: 61
From: Oak Harbor, WA
Mrredline05 is on a distinguished road
Ok... let me clear that up. Does it stay bright all the time, as if the brakes are always being applied somehow. Cause i have no clean different inbetween applying or releasing the brake
Old May 22, 2013 | 10:11 PM
  #4  
NHSH's Avatar
Senior Member
SuperBike
 
Joined: Jul 2011
Posts: 1,461
From: South of Live Free or Die & North of Family Guy
NHSH is on a distinguished road
Originally Posted by Mrredline05
Ok... let me clear that up. Does it stay bright all the time, as if the brakes are always being applied somehow. Cause i have no clean different inbetween applying or releasing the brake
Check the rear brake light switch adjustment, most likely that would be the first cause. See if it's seats in the right place as well.
Old May 22, 2013 | 10:13 PM
  #5  
Mrredline05's Avatar
Thread Starter
Member
Squid
 
Joined: May 2013
Posts: 61
From: Oak Harbor, WA
Mrredline05 is on a distinguished road
checked it, and disconnected it to see if it would go off, and its still bright. So i wonder if it the front break, but i cant seem to find where the front break adjustment would be.
Old May 22, 2013 | 10:25 PM
  #6  
CruxGNZ's Avatar
Rex Kramer-Thrill Seeker
SuperBike
 
Joined: Jan 2011
Posts: 2,312
From: Brookfield, WI
CruxGNZ is on a distinguished road
Just so you know...

Brake


Break


Got it?
Old May 22, 2013 | 10:31 PM
  #7  
CruxGNZ's Avatar
Rex Kramer-Thrill Seeker
SuperBike
 
Joined: Jan 2011
Posts: 2,312
From: Brookfield, WI
CruxGNZ is on a distinguished road
Originally Posted by Mrredline05
... i have no clean different inbetween applying or releasing the brake
Are you sure it's the brake light you are seeing? It couldn't possibly be the running light? What tailight are you using, stock, aftermarket, LED?
Old May 22, 2013 | 11:51 PM
  #8  
Tweety's Avatar
Out of my mind, back in 5
MotoGP
 
Joined: Nov 2006
Posts: 6,109
From: Skurup, Sweden
Tweety is on a distinguished road
I'd suggest taking a multimeter, and checking the three wires to the tail light... The wiring diagram tells you which one is tail light, brake light, and ground... If you have voltage to both, then you have an issue to fix...
Old May 23, 2013 | 05:35 AM
  #9  
E.Marquez's Avatar
Administrator
MotoGP
 
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
E.Marquez is on a distinguished road
The stock front brake light switch is a paddle type mounted in the master cylinder right at the brake lever.

And it has no adjustment.. It's either closed (off) or open (on)
using a multimeter, check the front switch pins.. you should have no continuity when the lever is closed and you should have continuity when the lever is squeezed.

Oh and G/Y (Green / yellow) is brake lights, G (Green) is tail lights.

Last edited by E.Marquez; May 23, 2013 at 05:41 AM.
Old May 23, 2013 | 06:47 AM
  #10  
Mrredline05's Avatar
Thread Starter
Member
Squid
 
Joined: May 2013
Posts: 61
From: Oak Harbor, WA
Mrredline05 is on a distinguished road
yes, i do know the different in brake and break, i just didn't go back and correct myself before i posted it.

Its not the daytime running light, i pulled the fuse for the brakes and it went dimmer, but was still on. So there is a clear difference in daytime light and brake light.

Ill have to run to autozone or something and see if i can get a multimeter and check the front brake.
Old May 23, 2013 | 07:03 AM
  #11  
cybercarl's Avatar
Senior Member
Superstock
 
Joined: May 2012
Posts: 397
From: UK
cybercarl is on a distinguished road
Ill have to run to autozone or something and see if i can get a multimeter and check the front brake.
Seems like a good excuse for new tool Very useful one to have as well, you will make good use of that.

The rear switch works of a spring attached to the rear pedal. It connected to the switch that is threaded, so Turn it clockwise (down) to release the pressure and the opposite for for more. You want this set so it's not permanently on and the switch only comes on as you apply the brake. That would be my first port of call and then go onto testing the wiring.

(:-})
Old May 23, 2013 | 08:23 AM
  #12  
7moore7's Avatar
Senior Member
MotoGP
 
Joined: Jul 2010
Posts: 3,871
From: Phoenix, AZ
7moore7 is on a distinguished road
Originally Posted by cybercarl
Seems like a good excuse for new tool Very useful one to have as well, you will make good use of that.

The rear switch works of a spring attached to the rear pedal. It connected to the switch that is threaded, so Turn it clockwise (down) to release the pressure and the opposite for for more. You want this set so it's not permanently on and the switch only comes on as you apply the brake. That would be my first port of call and then go onto testing the wiring.

(:-})
+1. Multimeters are awesome. I'd highly recommend a digital one... it is something that you can use in your home, on your motorcycle, cars, small electronics and such so it's worth getting one that is more fun to use.

If you disconnected the rear and it's still "on" then you have some hunting to do.


Thread Tools
Search this Thread

All times are GMT -7. The time now is 06:10 AM.


Top

© 2026 MH Sub I, LLC dba Internet Brands



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.