New set of delkevic cans
#1
New set of delkevic cans
So I bought this set of cans for the hawk as the yoshi's on it were damaged and have a hole burnt in the side of one. It was running these pipes when I got it and I have swapped carbs from my old superhawk onto it which if i remember right i bumped up the jets to 175f 178r. I'm worried about too little back pressure if I remove the baffles causing it to run lean but the cans on it have no baffles either. My buddy has a set a danmoto carbon fibers of similar size and I like how deep and bratty they make his bike and am worried the baffle may ruin this but also like my bikes well being
#3
although some people might pay extra for the ol' side dump exhaust too bad yoshi dont sell em anymore. I liked the sound a lot. Hopefully delkevic treats me good
#4
I had them on mine and I like the sound and looks. Good Job!! Mine are coming on the 11th, too bad I will be at a conference. Will have to wait til I get back on the 13th! You presumably lose 15lbs just by eliminating the stock cans.unk..
Last edited by Wolverine; 03-25-2021 at 08:09 AM. Reason: remove links
#5
Hello Folks, I'm pondering supplanting my stock fumes with a full Delkevic set since my stock headers look like ***. The past proprietor evidently never cleaned the front headers and they look awful.
Last edited by Wolverine; 03-25-2021 at 08:09 AM. Reason: remove links
#6
Hello Folks, I'm pondering supplanting my stock fumes with a full Delkevic set since my stock headers look like ***. The past proprietor evidently never cleaned the front headers and they look awful.
192.168.100.1 192.168.1.1
192.168.100.1 192.168.1.1
Spam from hell and nothing relevant with their posts.
🙄🖕🏻🖕🏻🖕🏻
#7
#8
#9
#10
j/k
And back to topic - Yikes what happened to that Yoshi exhaust?
Jeez I have Erion's almost since new - a bit beat up but still sound good.
I would leave baffles in for back pressure & not to **** off neighbors and get undue attention from LEO.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post