Mosfet wiring!
08-10-2015, 06:25 PM
#1
Junior Member
Squid
Thread Starter
Join Date: May 2015
Posts: 1
Mosfet wiring!
I am apologizing in advance if tweety covered this. i couldnt actually find a wiring
But i bought a replacement R/R off ebay. Ended up going out and wont charge the battery a few months later. I decided to cut the plug and wire it in and shrink wrap a mosfet R/R. Here is the one i bought. MOSFET Regulator Rectifier Kawasaki ZX 10R Ninja ZX10R ZX1000 2004 05 06 2007 | eBay
I just wanted to make sure im wiring it right. or anything i missed? i cut my plug and am soldering female clips to put on the pins. then shrink wrapping.
https://i.imgur.com/ZHjj3hu.jpg
But i bought a replacement R/R off ebay. Ended up going out and wont charge the battery a few months later. I decided to cut the plug and wire it in and shrink wrap a mosfet R/R. Here is the one i bought. MOSFET Regulator Rectifier Kawasaki ZX 10R Ninja ZX10R ZX1000 2004 05 06 2007 | eBay
I just wanted to make sure im wiring it right. or anything i missed? i cut my plug and am soldering female clips to put on the pins. then shrink wrapping.
https://i.imgur.com/ZHjj3hu.jpg
08-10-2015, 08:24 PM
#2
Senior Member
SuperBike
SuperBike
Join Date: Feb 2013
Posts: 1,509
Scroll down to post #108 in my build thread. I installed the same ZX10 R/R.
https://www.superhawkforum.com/forum...d-30939/page4/
James
https://www.superhawkforum.com/forum...d-30939/page4/
James
08-11-2015, 02:21 AM
#3
Moderator
MotoGP
Join Date: Jul 2007
Location: Gettysburg, Pa
Posts: 5,071
Does post number one help?
Thread
Thread Starter
Forum
Replies
Last Post
