Technical Discussion Topics related to Technical Issues

Identify USD forks?

Old Aug 11, 2015 | 09:42 AM
  #1  
Rebirth98's Avatar
Thread Starter
Member
Squid
 
Joined: Jan 2013
Posts: 87
Rebirth98 is on a distinguished road
Identify USD forks?

My Vtr was previously altered before owning it and i am slowly learning all of the different "modifications" as i tear into her. I have upside forks on the hawk and they are showa brand. the sticker near the front wheel reads showa "MCF-A01" any ideas? I also need the diameter of the upper fork tubes to buy or make mounts for my dominator headlights.

Thanks
Old Aug 11, 2015 | 09:45 AM
  #2  
killer5280's Avatar
Senior Member
SuperBike
 
Joined: Aug 2004
Posts: 1,806
From: Atlanta, GA
killer5280 is on a distinguished road
Pictures might help.
Old Aug 11, 2015 | 10:24 AM
  #3  
Rebirth98's Avatar
Thread Starter
Member
Squid
 
Joined: Jan 2013
Posts: 87
Rebirth98 is on a distinguished road
This is always true
Attached Thumbnails Identify USD forks?-fork-pic-1.jpeg   Identify USD forks?-fork-pic-3.jpeg   Identify USD forks?-fork-pic-2.jpeg  
Old Aug 11, 2015 | 10:31 AM
  #4  
Wolverine's Avatar
Moderator
MotoGP
 
Joined: Jul 2007
Posts: 5,221
From: Gettysburg, Pa
Wolverine is on a distinguished road
Look like RC51.
Old Aug 11, 2015 | 01:30 PM
  #5  
killer5280's Avatar
Senior Member
SuperBike
 
Joined: Aug 2004
Posts: 1,806
From: Atlanta, GA
killer5280 is on a distinguished road
Originally Posted by Wolverine
Look like RC51.
That's what they look like to me, too.
Old Aug 11, 2015 | 02:03 PM
  #6  
Jack Flash's Avatar
Well take off, eh.
SuperBike
 
Joined: Jun 2012
Posts: 1,206
From: QC, Canada
Jack Flash is on a distinguished road
RC-51 it is. The caliper bracket is the give away.
Old Aug 11, 2015 | 02:46 PM
  #7  
Cadbury64's Avatar
VTR virgin
Superstock
 
Joined: Mar 2015
Posts: 447
From: Auckland, New Zealand
Cadbury64 is on a distinguished road
MCF is the part code for the RC-51.
Old Aug 11, 2015 | 05:50 PM
  #8  
Rebirth98's Avatar
Thread Starter
Member
Squid
 
Joined: Jan 2013
Posts: 87
Rebirth98 is on a distinguished road
you guys are money. Anyone have off hand knowledge of upper fork tube diameter so i dont have to hunt down a micrometer
Old Aug 11, 2015 | 08:39 PM
  #9  
killer5280's Avatar
Senior Member
SuperBike
 
Joined: Aug 2004
Posts: 1,806
From: Atlanta, GA
killer5280 is on a distinguished road
Here's a link to a little chart someone put together, but, like the webpage says, be careful because upper fork tubes can taper in and out.
Fork Tube Chart
Old Aug 11, 2015 | 09:37 PM
  #10  
NHSH's Avatar
Senior Member
SuperBike
 
Joined: Jul 2011
Posts: 1,461
From: South of Live Free or Die & North of Family Guy
NHSH is on a distinguished road
50 same as CBR1000rr
Old Aug 11, 2015 | 09:40 PM
  #11  
NHSH's Avatar
Senior Member
SuperBike
 
Joined: Jul 2011
Posts: 1,461
From: South of Live Free or Die & North of Family Guy
NHSH is on a distinguished road
BTW, if you think of a nice alternative for higher handlebars, Ducati ST3 is also 50 and fit perfectly.
Old Aug 11, 2015 | 10:32 PM
  #12  
smokinjoe73's Avatar
Senior Member
MotoGP
 
Joined: Jul 2007
Posts: 5,066
From: NYC
smokinjoe73 is on a distinguished road
NHSH, how high is the rise on those bars, I may need some that are sub apex price.
Old Aug 12, 2015 | 05:24 PM
  #13  
Rebirth98's Avatar
Thread Starter
Member
Squid
 
Joined: Jan 2013
Posts: 87
Rebirth98 is on a distinguished road
Again many thanks and I will look up those bars and check prices.

Check in for homemade rad scoops to hide rads. My not look the prettiest but uses my
Left over hot body fiberglass part and hides those unsightly rads. Plus might be my chance at a one off although someone's done it haha.
Old Aug 12, 2015 | 09:52 PM
  #14  
NHSH's Avatar
Senior Member
SuperBike
 
Joined: Jul 2011
Posts: 1,461
From: South of Live Free or Die & North of Family Guy
NHSH is on a distinguished road
Originally Posted by smokinjoe73
NHSH, how high is the rise on those bars, I may need some that are sub apex price.
Joe, I'm not sure, I can take a measurement and some close up pictures tomorrow
Old Aug 13, 2015 | 09:31 PM
  #15  
NHSH's Avatar
Senior Member
SuperBike
 
Joined: Jul 2011
Posts: 1,461
From: South of Live Free or Die & North of Family Guy
NHSH is on a distinguished road
Joe, I measured the risers, I have 3 inches above the upper triple tree
Attached Thumbnails Identify USD forks?-dscn9431.jpg   Identify USD forks?-dscn9432.jpg  
Old Aug 13, 2015 | 09:49 PM
  #16  
smokinjoe73's Avatar
Senior Member
MotoGP
 
Joined: Jul 2007
Posts: 5,066
From: NYC
smokinjoe73 is on a distinguished road
NH, what year are they and why cant I find any on ebay? They look to be what I need for my front end swap.
Old Aug 13, 2015 | 09:57 PM
  #17  
NHSH's Avatar
Senior Member
SuperBike
 
Joined: Jul 2011
Posts: 1,461
From: South of Live Free or Die & North of Family Guy
NHSH is on a distinguished road
Originally Posted by smokinjoe73
NH, what year are they and why cant I find any on ebay? They look to be what I need for my front end swap.
That was from an 07, probably not too many of them, but keep an eye.
Old Aug 14, 2015 | 08:06 AM
  #18  
CruxGNZ's Avatar
Rex Kramer-Thrill Seeker
SuperBike
 
Joined: Jan 2011
Posts: 2,312
From: Brookfield, WI
CruxGNZ is on a distinguished road
Found some for ya. Just a tad bit expensive Ducati ST3 clipons

I really like the look of those. Makes it look stock. If I didn't already buy some Danmoto clipons, I would try to find a cheap set of those from an ST3.

Last edited by CruxGNZ; Aug 14, 2015 at 08:09 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HRCA#1
Classifieds
14
Oct 13, 2012 10:20 AM
JPP
Classifieds
2
May 23, 2012 05:59 PM
VTRsupersport
Modifications - Performance
2
Feb 29, 2012 05:09 AM
katryder1@gmail.com
Modifications - Performance
8
Apr 25, 2011 07:37 AM
DimSTriple
Modifications - Performance
4
Sep 10, 2008 05:51 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 05:35 PM.


Top

© 2026 MH Sub I, LLC dba Internet Brands



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.