I have no idea where this line goes book shows it going into the carb, but it wrong that comes from the bottom outlet .

The book Work shop manual is not looking right to me as there only two water lines going into the carb's not 3 !

Where dose this last one go? this one going left side small one in photo

of the thermostat-housing

 

Can you post a bigger pic.

 

more photos

 

Pg 95 Does that help?

 

Yep see that nub on the back of the thermostat that has no hose on it this I have and it dose not show where it goes .

or what is is for thanks for trying

J.

 

If any one has a Super hawk 996 please post a photo of you bikes thermostat lines

 

Sorry to get back to you so late on this... I have that little 1/4" spigot on the back of my thermostat housing too, but it is epoxied shut, and goes nowhere.

James

 

No need it's pluged ?

 

When I reassembled my bike I took an hour to figure out where the port on the back of the thermostat housing went. After looking at a lot of pics I realized no hose connects to it or not in the pics I saw. Does your bike have the pair valve installed? I have no clue why a coolant line would need to be routed through the pair valve but maybe that's why some are absent this connection.