i ripped out my fork tueb to fix the dampening issue i was having with one side, its fixed and working again. put the bike back together and started to setup my front suspension again and noticed i had play in the front end. id hold the brakes and push down and it would rock forward and back a little and click. so im like wtf so i played with it, everything i put back on is tight. i triple checked it all, the brakes are tight aswell. so i grabbed the rotor and noticed it has some forward and back play in it. now full floating rotors have a little side to side play i know that, but i dont ever remember these things having front to back play in them. how much would be considered normal if any, and where can i get some new buttons from for these? theyre ebc 320 mm rotors

 

There should be no front to back play in your rotors.

For buttons, I would contact EBC to start with.

 

Figured as much. **** yet another expense. Thanks bud