Sag
Thread Starter
Senior Member
SuperBike
Joined: Feb 2013
Posts: 1,510
Sag
So in this thread Roger Ditchfield suggests the front forks be set to 28mm sag, and the rear shock be set to 8mm sag.
www.vtr1000.org ? View topic - Standard Fork Upgrade Service Guide
In this post Greg (Hawk Rider) recommends setting the rear shock to 25mm sag.
https://www.superhawkforum.com/forum...ossible-30286/
Does anyone have any opinions as to who is right and WHY?
James
www.vtr1000.org ? View topic - Standard Fork Upgrade Service Guide
In this post Greg (Hawk Rider) recommends setting the rear shock to 25mm sag.
https://www.superhawkforum.com/forum...ossible-30286/
Does anyone have any opinions as to who is right and WHY?
James
VTR virgin
Superstock
Joined: Mar 2015
Posts: 447
From: Auckland, New Zealand
Perhaps there is some confusion between free (unloaded) sag and sag with the rider on board. This is from the RaceTech suspension bible:
In general you want your sag (with rider) to be about 1/3 of the total travel.
In general you want your sag (with rider) to be about 1/3 of the total travel.
Thread
Thread Starter
Forum
Replies
Last Post
vermontzx6r
Modifications - Performance
4
Sep 25, 2008 06:53 PM
