Projector from theretrofitsource.com
08-13-2014, 12:11 PM
#1
Member
Squid
Thread Starter
Join Date: Jul 2013
Location: Orlando, FL
Posts: 40
Projector from theretrofitsource.com
Hey guys, I recently purchased an extra headlight to retrofit with a projector. I have come across several threads here recommending projectors from theretrofitsource.com. I think I'm going to go with this specific one, Bi-xenon: Sportbike Stage I Kit
Now my question is, do i have to do anything else besides dropping this kit into the housing (add hardware, cut anything, space the bulb out, etc)? I noticed the projectors from say the FX35 require modification for setting in place and adjustments later on and normally users add a piece of sheet metal to give it a clean look.
Thanks in advance for any help!
Now my question is, do i have to do anything else besides dropping this kit into the housing (add hardware, cut anything, space the bulb out, etc)? I noticed the projectors from say the FX35 require modification for setting in place and adjustments later on and normally users add a piece of sheet metal to give it a clean look.
Thanks in advance for any help!
08-13-2014, 12:26 PM
#2
Pew Pew...lasers
Superstock
Join Date: Jun 2007
Location: Alexandria, Va.
Posts: 311
It is a complete drop in kit. Just open up your headlight and put the projector, bezel, and bezel lock ring if yours came with one. Don't think all the bezel came with or need one. No cutting required. The cut off is pretty nice so no sheet metal needed.
08-13-2014, 12:42 PM
#3
Member
Squid
Thread Starter
Join Date: Jul 2013
Location: Orlando, FL
Posts: 40
08-13-2014, 01:47 PM
#5
Member
Squid
Thread Starter
Join Date: Jul 2013
Location: Orlando, FL
Posts: 40
EDIT: Just looked it up, I guess I need LHD in the US
Last edited by dudeitscristhian; 08-13-2014 at 01:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post
