micron exhaust
05-29-2014, 10:38 PM
#1
Newbie to the *****
Back Marker
Thread Starter
Join Date: Feb 2014
Location: Cuse, NY
Posts: 108
micron exhaust
does micron exhaust require tuning or any other modification if i just get slip on pipes? read alot if you put slip ons on after you have to tune it. i only plan on doing slip on exhaust and thats it
05-30-2014, 05:27 PM
#4
Senior Member
SuperSport
Join Date: Jul 2012
Location: Santa Fe, New Mexico
Posts: 582
if you're gonna go to the expense of changing the exhaust you might as well tune the carburetors so the bike runs best. At least try hawks carb tune thread, it's easy and you will be glad you did it.
05-30-2014, 10:20 PM
#5
Senior Member
MotoGP
Join Date: Jul 2007
Location: NYC
Posts: 5,033
So the answer is no, you dont at all have to, all will be fine as is. But since they flow more you will get benefit from some (re-)jetting (there is a detailed thread about it on here).
But if you are asking this question, its unlikely you are about to rip into your carbs.
A shop will charge you a lot to do the job, so wait til you're bored or want to dump the money.
But if you are asking this question, its unlikely you are about to rip into your carbs.
A shop will charge you a lot to do the job, so wait til you're bored or want to dump the money.
05-31-2014, 07:38 AM
#6
Member
Squid
Join Date: Jul 2012
Posts: 58
I have a micron exhaust and with factory settings on the carb and pair disabled it does run a little lean. Minor tiny pop ever once in a while. Just as smokin joe said you would be fine as is.
I'm certainly happy with it sounds good.
I'm certainly happy with it sounds good.
Thread
Thread Starter
Forum
Replies
Last Post
Speed_Demon
Classifieds
0
03-10-2006 01:43 PM
