Sorry to make my first post such a dead horse, but I can't find and conclusive information anywhere on the net as to where I can buy hardware to mount passenger pegs with high mount exhaust. If anyone could provide a link or phone number to an actual supplier of longer bolts or extenders I would be very grateful.

 

I don't see them listed on the site, but my SH has standoffs for the passenger pegs. I am assuming that they came with the Jardine High mounts that the PO installed.
http://www.jardineproducts.com/

If you have a machine shop near you, these should be easy for them to make, and relatively cheap. Round aluminum stock is all you need. Take one of the current bolts in and have them put it in a thread gauge and they can make longer ones for you.

This is what I'm doing. I have spacers, but I need some more. I installed pegs with LEDs, but they are behind the cans, so I'm going to space them out another 1.5 inches. I'll post pics when it's all done.


Erik

 

i have bolts and spacers from a leo vince high mount system but i used support that came with the system to hold the cans , you can have them if they will help

 

I just posted pics and details last week on how I solved the issue with my Jardine's... a quick search would find that thread

 

why not go to a hardware store and get allen head bolts long enough? my jardine spacer is 1 1/2" long X 7/8" wide and the bolt is 2 3/4" lond but i dont know the thread pitch. you might be able to get a 1" solid roung bar stock and have someone with a drill press put a hole in the middle. lowes or home depot and the like should have those parts.

 

you could use washers too kinda tacky but most people wont look