View Poll Results: make your vote count
Billzilla15
2
6.90%
7moore7
16
55.17%
VtrInMtl
4
13.79%
bigspanishmarty
7
24.14%
Voters: 29. You may not vote on this poll
VTROTM MAY 2013
#1
road racer v2 power
Superstock
Superstock
Thread Starter
Join Date: Jan 2011
Location: coventry england
Posts: 265
VTROTM MAY 2013
Congratulations to 7moore7 for winning the may 2013 VTROTM!
A BIG thanks to everybody who participated in .......... VTROTM, If you did not win,
be sure to get your nomination in again this month for your chance at SHF fame and glory!
A BIG thanks to everybody who participated in .......... VTROTM, If you did not win,
be sure to get your nomination in again this month for your chance at SHF fame and glory!
Last edited by lloydievtr; 06-01-2013 at 07:21 AM.
#2
I will be in.... Just waiting for two parts (reservoir extension for rear master and bracket for steering damper) to come in so I can install them (should be here in next day or so), then I will snap some pics and post them..... woohoo!!!
#8
#10
mikstr, join the fun! I want to see some more rides... I think it's been a year since I was in...
Streetfighter V1.1
Undersprung 2000 CBR 929RR front end
Rear raised 7 mm
Ohlins rear shock
SS front brake and clutch lines
AllBalls bearings used in all replaced part.
Embellished tank lines (yay bondo!). Custom paint.
Honda VLX light with bro led's (angel eye)
Carbon fiber front fender
Integrated turn signal mirrors
E-Bay vinyl seat covering
Danger-zone homemade pointy levers
Powdercoated frame, swingarm, wheels, rearsets, levers, clipons, gas cap ring, valve covers, passenger footrest supports, triples
Obnoxiously loud DanMoto titanium slip-ons with wrapped and painted headers.
CBR F4i Gauges with absent fuel sender to save weight . Special optical inspection method is implemented for determining fuel levels. Expertly fastened with polymer locking straps (aka zip ties)
Morimoto Mini D2S projector headlamp (and HID kit to go in it)
CBR 600RR stick coils
TPS ohms set to 499
R1 R/R
4.6AHr of Lithium Phosphate awesomeness
APE CCT's
PAIR is gone
16/42 gears with Stealth rear sprocket.
Lightened Flywheel
8541Hawk's carb setup. Currently running emissions friendly 45 pilots though.
Billet Velocity Stacks
Clutch case window with painted clutch pressure plate. So you can tell for sure when it's spinning. Sometimes the moving bike just isn't enough evidence.
Undertail radiator (Two pusher fans, wired to turn on at 90 degrees C). I give up before it does in the Arizona heat.
My buddy took these instagram-esque pics at work on Monday, they're the only ones with the new mirrors that I have:
And this is the only one I have of the new headlight setup turned on:
[/QUOTE]
Streetfighter V1.1
Undersprung 2000 CBR 929RR front end
Rear raised 7 mm
Ohlins rear shock
SS front brake and clutch lines
AllBalls bearings used in all replaced part.
Embellished tank lines (yay bondo!). Custom paint.
Honda VLX light with bro led's (angel eye)
Carbon fiber front fender
Integrated turn signal mirrors
E-Bay vinyl seat covering
Danger-zone homemade pointy levers
Powdercoated frame, swingarm, wheels, rearsets, levers, clipons, gas cap ring, valve covers, passenger footrest supports, triples
Obnoxiously loud DanMoto titanium slip-ons with wrapped and painted headers.
CBR F4i Gauges with absent fuel sender to save weight . Special optical inspection method is implemented for determining fuel levels. Expertly fastened with polymer locking straps (aka zip ties)
Morimoto Mini D2S projector headlamp (and HID kit to go in it)
CBR 600RR stick coils
TPS ohms set to 499
R1 R/R
4.6AHr of Lithium Phosphate awesomeness
APE CCT's
PAIR is gone
16/42 gears with Stealth rear sprocket.
Lightened Flywheel
8541Hawk's carb setup. Currently running emissions friendly 45 pilots though.
Billet Velocity Stacks
Clutch case window with painted clutch pressure plate. So you can tell for sure when it's spinning. Sometimes the moving bike just isn't enough evidence.
Undertail radiator (Two pusher fans, wired to turn on at 90 degrees C). I give up before it does in the Arizona heat.
My buddy took these instagram-esque pics at work on Monday, they're the only ones with the new mirrors that I have:
And this is the only one I have of the new headlight setup turned on:
[/QUOTE]
#12
i'm in!!!!
hi guys
been lurking for a while now, so its about time i entered the bike of the month comp.
heres my winter project that me and fellow member cybercarl worked on over thru a freezing cold uk winter. and heres a list of mods
------------------
satin black
-----------------
frame
swingarm
rear subframe
cam covers
radiators
----------------
lightened flywheel
carbon fibre engine covers
new pyramid hugger
fender extender
brand new tyres
ape cct's
late model reg/rec
pro bolt fairing kit
goodridge braided brake and clutch lines
tinted double bubble screen
tinted head light cover
stainless steel race cans
machined original exhaust hangers painted satin black
late model handle bars
front and rear numberboards
led dash bulbs
6mm shock spacer
single seat cowl
black metal mesh in front air scoops
tinted indicator lenses
bsabloke 50mm mirror extenders
gold reflective rim tape
try to ignore the rhs mirror, its been changed to a stock item.
i hope to start rebuilding my spondon framed firestorm in the next month or so....
been lurking for a while now, so its about time i entered the bike of the month comp.
heres my winter project that me and fellow member cybercarl worked on over thru a freezing cold uk winter. and heres a list of mods
------------------
satin black
-----------------
frame
swingarm
rear subframe
cam covers
radiators
----------------
lightened flywheel
carbon fibre engine covers
new pyramid hugger
fender extender
brand new tyres
ape cct's
late model reg/rec
pro bolt fairing kit
goodridge braided brake and clutch lines
tinted double bubble screen
tinted head light cover
stainless steel race cans
machined original exhaust hangers painted satin black
late model handle bars
front and rear numberboards
led dash bulbs
6mm shock spacer
single seat cowl
black metal mesh in front air scoops
tinted indicator lenses
bsabloke 50mm mirror extenders
gold reflective rim tape
try to ignore the rhs mirror, its been changed to a stock item.
i hope to start rebuilding my spondon framed firestorm in the next month or so....
Last edited by bigspanishmarty; 05-14-2013 at 01:33 PM. Reason: more info added
#15
7moore7-that streetfighter SHawk of yours is so cool. I want you to win so I can get you out of the way for next month Maybe I'll get some fresh pics of mine and try next month. The elusive mkster may even show up
Seriously, your bike is bada--, that new headlight set up just makes it.
Seriously, your bike is bada--, that new headlight set up just makes it.
#16
7moore7, my vote would have been for yours (it has been before)
I think it needs a few things with that new headlight. A fly screen of some sort, similar to an NT650 Hawk, and a braced swinger - then she'd be perfect!
I think it needs a few things with that new headlight. A fly screen of some sort, similar to an NT650 Hawk, and a braced swinger - then she'd be perfect!
#18
#20
if so, that was added when i had a big bore ti exhaust, and it was needed to help my foot reach the sidestand, but now theres a standard exhaust i should really return it to normal.
Thread
Thread Starter
Forum
Replies
Last Post