Hi guys, this may sound silly, after rebuilding the whole bike, I cannot find a suitable mounting bracket in my small parts "still to fit" box to clamp the rubber hose to the lower frame ! Help anyone Cheers.

 

cant find it... zip tie it...

 

if it's what I'm thinking of, it was a fancy zip tie that was right in the area of the lower rear bolt of the fairing. There were a couple different wires and such bundled together. A standard zip tie should do the trick.

 

Well I don't have a close up of the hangers hopefully these pics will help.... you might have to download the image and blow it up a little but those are all I have of the clutch line







Also the front hanger is the reusable zip tie that the wiring harness passes through in the front and the rear hanger mounts with the lower fairing bracket.

 

Your last picture has jogged my memory........and found the plastic clip. Thanks guys for all your help.