Will a 98 vtr clutch cover fit a 2002 vtr?
Thread Starter
Über Member
Superstock
Joined: Aug 2010
Posts: 293
From: Virginia Beach VA.
Will a 98 vtr clutch cover fit a 2002 vtr?
I found a clutch cover from a 98 I have a 02 will the year gap have any difference in construction internal that may interfere with the clutch or anything in general?
Thread Starter
Über Member
Superstock
Joined: Aug 2010
Posts: 293
From: Virginia Beach VA.
Thread Starter
Über Member
Superstock
Joined: Aug 2010
Posts: 293
From: Virginia Beach VA.
Administrator
MotoGP
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
And a late model R1 for $25~35 plus OEM plugs from Eastern beaver ($18) and you have better then OEM set up that looks OEM.
the boss
SuperBike
SuperBike
Joined: Mar 2010
Posts: 1,182
From: largo,fl
the r/r is called the rectifier,its for the charging system,the old stock one is known to fail.
the newer ones from honda is finned but it looks small to me.
there is a write up on here for the r/r swap,you should see if you have the old one or the finned one.if you have the newer honda finned one,you should be good.
it will bo located on that same spot,but smaller,thats the R6 r/r
the newer ones from honda is finned but it looks small to me.
there is a write up on here for the r/r swap,you should see if you have the old one or the finned one.if you have the newer honda finned one,you should be good.
it will bo located on that same spot,but smaller,thats the R6 r/r
Last edited by saige; Sep 29, 2010 at 02:34 PM. Reason: misspelling
RUNLEVELZERO #99
SuperBike
Joined: Jan 2007
Posts: 2,218
From: Skokie
I believe 02 & later added a rubber spigot & hose from the water pump drain hole so coolant that seeped past the impeller seals did not drip down the cover & alarm people; otherwise besides finish type & color, the right side covers are interchangeable. How did this thread diverge to VR/R?
Thread
Thread Starter
Forum
Replies
Last Post
Crashrat
Classifieds
40
Oct 11, 2012 08:25 PM
rafbo
Technical Discussion
1
Jul 16, 2011 10:24 AM
