twin headlight system for hawk
Out of my mind, back in 5
MotoGP
Joined: Nov 2006
Posts: 6,109
From: Skurup, Sweden
Yep... It's been done... One way is to swap the entire front end plastics... Apparently the CBR600 from some years can be made to fit... Also the RC-51 plastics can be fitted with some work...
The other is to swap out the stock headlight for a mounting for two smaller projector lights... Here is one example... http://cgi.ebay.com/ebaymotors/TWIN-...91110009r26902
Then there is the option to go with race plastics and make a totaly custom job your self...
The other is to swap out the stock headlight for a mounting for two smaller projector lights... Here is one example... http://cgi.ebay.com/ebaymotors/TWIN-...91110009r26902
Then there is the option to go with race plastics and make a totaly custom job your self...
Out of my mind, back in 5
MotoGP
Joined: Nov 2006
Posts: 6,109
From: Skurup, Sweden
Greenmeansgo!
Back Marker
Joined: Jul 2008
Posts: 199
Looks good, Tweety, but it needs a little... something...
There are some cool dual kits for streetfighters here, not sure how hard it would be to adapt, or if it'd be worth it. I like the Hesa Headlight fire myself, that vertical stack is nice.
http://www.streetfightersinc.com/Headlightkits.htm
There are some cool dual kits for streetfighters here, not sure how hard it would be to adapt, or if it'd be worth it. I like the Hesa Headlight fire myself, that vertical stack is nice.
http://www.streetfightersinc.com/Headlightkits.htm
Out of my mind, back in 5
MotoGP
Joined: Nov 2006
Posts: 6,109
From: Skurup, Sweden
Looks good, Tweety, but it needs a little... something...
There are some cool dual kits for streetfighters here, not sure how hard it would be to adapt, or if it'd be worth it. I like the Hesa Headlight fire myself, that vertical stack is nice.
http://www.streetfightersinc.com/Headlightkits.htm
There are some cool dual kits for streetfighters here, not sure how hard it would be to adapt, or if it'd be worth it. I like the Hesa Headlight fire myself, that vertical stack is nice.
http://www.streetfightersinc.com/Headlightkits.htm
My bike is a no bling zone... It goes like crazy in the corners instead... It's so fun to do circles around the squids on blinged out bikes...Altough if I do find a suitable shroud/ring in chrome or otherwise I will use that to cover the irregular shape of the projector itself... I like the clean black, but the way it looks is mostly to have it sealed up... No light leaking in the wrong places...
Last edited by Tweety; Nov 24, 2008 at 05:04 AM.
I could ride in
SuperBike
Joined: Sep 2007
Posts: 1,729
From: Dayton, TN
The other is to swap out the stock headlight for a mounting for two smaller projector lights... Here is one example... http://cgi.ebay.com/ebaymotors/TWIN-...91110009r26902
They went to the trouble to make it look like a HID projector... then put incandescent bulbs in it... doesn't make much sense to me...
Out of my mind, back in 5
MotoGP
Joined: Nov 2006
Posts: 6,109
From: Skurup, Sweden
Out of my mind, back in 5
MotoGP
Joined: Nov 2006
Posts: 6,109
From: Skurup, Sweden
Low/High... solenoid... It's from a nissan G35...
BTW look here for a gallery... Text is in Swedish so it might not be usefull... But there are a few more snaps...
Basicly what it says about the HID... The rear two bolts used to adjust the aim is functional... The projector is mounted on a "frame" of 2 mm aluminium sheet that is brushed matte and painted black... and uses the 3 internal mount points... one fixed joint and two bolts...
Iteration 2 will be prettier... I have figured out how to hide the two hex bolts from view and in that process I'm going to tighten up the gap in a few places around the projector...
BTW look here for a gallery... Text is in Swedish so it might not be usefull... But there are a few more snaps...
Basicly what it says about the HID... The rear two bolts used to adjust the aim is functional... The projector is mounted on a "frame" of 2 mm aluminium sheet that is brushed matte and painted black... and uses the 3 internal mount points... one fixed joint and two bolts...
Iteration 2 will be prettier... I have figured out how to hide the two hex bolts from view and in that process I'm going to tighten up the gap in a few places around the projector...
Last edited by Tweety; Nov 24, 2008 at 03:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
EngineNoO9
General Discussion
9
Nov 20, 2006 05:08 PM
