Too many CCA's on battery?
#1
Too many CCA's on battery?
I have a 2000 Buell Cyclone that uses a battery with 270 CCA's. I was wondering if anyone thought that this could do any damage in a SH that I believe only needs 210 CCA's.
If so, hurry and let me know before its too late....I'm impatient
If so, hurry and let me know before its too late....I'm impatient
Last edited by psyclown; 03-11-2010 at 02:02 PM.
#3
What does CCA mean?
Cold Cranking Amps is a rating used in the battery industry to define a battery's ability to start an engine in cold temperatures. The rating is the number of amps a new, fully charged battery can deliver at 0° Farenheit for 30 seconds, while maintaining a voltage of at least 7.2 volts, for a 12 volt battery. The higher the CCA rating, the greater the starting power of the battery.
I borrowed the above from: http://www.autobatteries.com/faq/index.asp
12 volts is 12 volts.
Rex
Cold Cranking Amps is a rating used in the battery industry to define a battery's ability to start an engine in cold temperatures. The rating is the number of amps a new, fully charged battery can deliver at 0° Farenheit for 30 seconds, while maintaining a voltage of at least 7.2 volts, for a 12 volt battery. The higher the CCA rating, the greater the starting power of the battery.
I borrowed the above from: http://www.autobatteries.com/faq/index.asp
12 volts is 12 volts.
Rex
Last edited by bjorn toulouse; 03-11-2010 at 04:25 PM. Reason: spellage
#5
The old rating system used Amp Hours. CCA as a rating started in the early '80s for car batteries. The 2 are related, but AH is easier to understand.
A 24 Amp Hour battery could put out 24 amps for 1 hour, or 1 amp for 24 hours, or 2 amps for 12 hours, etc.
When a battery is load tested, it should be loaded for 15 seconds @ 1/2 the CCA. If the battery is rated in Amp Hours it is loaded for 15 seconds @ 3 times the AH rating. 9.6V or more at the end of the 15 sec load indicates the battery is okay.
Therefore, for purposes of testing, Amp Hours x 6 = CCA.
A 24 Amp Hour battery could put out 24 amps for 1 hour, or 1 amp for 24 hours, or 2 amps for 12 hours, etc.
When a battery is load tested, it should be loaded for 15 seconds @ 1/2 the CCA. If the battery is rated in Amp Hours it is loaded for 15 seconds @ 3 times the AH rating. 9.6V or more at the end of the 15 sec load indicates the battery is okay.
Therefore, for purposes of testing, Amp Hours x 6 = CCA.
Thread
Thread Starter
Forum
Replies
Last Post
dpenix76
General Discussion
23
09-07-2007 09:12 PM
grampi
General Discussion
13
11-21-2006 07:49 AM
NOrrTH
Technical Discussion
3
11-25-2005 09:59 AM