Longer bolts for rear pegs
Thread Starter
Senior Member
Superstock
Joined: May 2005
Posts: 251
From: Mid. Tennessee
Longer bolts for rear pegs
I have a Two Bros. High mount. What I am doing is making spacers so I can put my stock rear pegs back on. The problem I am having is finding bolts long enough that will work. Any ideas where I could find some.
I have checked all the local places with no luck.
They need to be 8mm x 1.25 x 127mm long (roughly).
Any help would be great.
Thanks,
Verne
I have checked all the local places with no luck.
They need to be 8mm x 1.25 x 127mm long (roughly).
Any help would be great.
Thanks,
Verne
Guest
Posts: n/a
Re: Longer bolts for rear pegs
Here ya Go, 130mm x 8mm.. In Ti :P
I love this supplier.... very quick service, and great products. Just ordered from them today.
I love this supplier.... very quick service, and great products. Just ordered from them today.
Senior Member
Back Marker
Joined: Jun 2004
Posts: 116
From: Springpatch, Flatland, Illinois
Here ya Go, 130mm x 8mm.. In Ti :P
I love this supplier.... very quick service, and great products. Just ordered from them today.
I love this supplier.... very quick service, and great products. Just ordered from them today.
OMG at almost $20 EACH!! ...and you need 4... I BET they love you.. do they at least povide LUBE with that lovin they are givin you?? For $80+shiping you can damn near buy the REAL TBR highmount kit...
I just used standard M8 x 120 bolts with shorter spacers and called it a day. It's tight, but it fits....
Guest
Posts: n/a
Here ya Go, 130mm x 8mm.. In Ti :P
I love this supplier.... very quick service, and great products. Just ordered from them today.
I love this supplier.... very quick service, and great products. Just ordered from them today.
OMG at almost $20 EACH!! ...and you need 4... I BET they love you.. do they at least povide LUBE with that lovin they are givin you?? For $80+shiping you can damn near buy the REAL TBR highmount kit...
I just used standard M8 x 120 bolts with shorter spacers and called it a day. It's tight, but it fits....
Never said what I ordered.. Did I 
.. You know them assumptions can be a real pain :P I ordered some fasteners from them today,, but not the ones posted. That was just for info.. Some folks spend on bling, just to spend.. all I was doing is helping to show the way(to an empty wallet)
Thread Starter
Senior Member
Superstock
Joined: May 2005
Posts: 251
From: Mid. Tennessee
Thanks guys.
Yeah the Titanium is a little over kill for me.
Like the guy I use to build bikes with. Would put the cheapest bolts on it but require Titanium washers on every thing. Go figure.
Verne
Yeah the Titanium is a little over kill for me.
Like the guy I use to build bikes with. Would put the cheapest bolts on it but require Titanium washers on every thing. Go figure.
Verne
Thread
Thread Starter
Forum
Replies
Last Post
Truckinduc
Classifieds
151
Sep 22, 2009 05:25 PM
