Hi all,

I just picked up a dandy Blue Flame Evo can from a 98-99 R1 on eBay (see below) that I`ll be using ahead with the 2-1 pipe conversion. BTW, I went with the R1 model as I figured it wouldn`t choke off the engine as I feared using just one of the Microns I now have would do (besides, I can now sell the Microns). Also, the Blue Flames can accept an accessory baffle to quiet then down a bit should it end up being on the loud side.

My question is the following: I recall seeing a pic quite recently of a streetfightered VTR that was running a Blue Flame Evo can on a 2-1 set-up yet cannot for the life of me find it again. Can anyone help me? I would jut like to pic the person`s brain a bit in terms of his/her experience.

cheers

 

I found it

Here it is: http://cgi.ebay.co.uk/ws/eBayISAPI.d...id=p2759.l1259

and here is a pic:

 

now I know it has been awhile since this thread has been touched, but I could use a little info on the evo twin tip... my question being, what is the baffle configuration inside the can? I have an empty can(no baffle or packing), and was hoping I could get a picture or something of how it looks before I tackle making one(baffle). I just want/need the can to flow the same or just as good as my high mount migs. any help would be appreciated. this is the closest thing I could find in the search bar, without making a new thread, that had anything to do with anything

 

A photo of the inside of the exhaust cap and inlet end cap would be helpful.