Fuel tank/cell
03-05-2009, 11:32 AM
#1
Senior Member
Back Marker
Thread Starter
Join Date: May 2006
Location: Cypress, TX
Posts: 218
Fuel tank/cell
I know this has probably been covered but i don't login that much...
Anyway, source for a larger tank.... if you have the $
http://www.eti-fuelcel.com/VTR.HTML
Our New Honda VTR endurance FuelCel increases the capacity to 5.3 gallons or 20 liters while cutting weight by more than 50%, 7.40 lbs lighter than the stock unit it replaces . Now you can have the additional range you have been needing!. This helps acceleration and also reduces the bikes polar-moment allowing you to turn in faster than before. This is due of course to ETI's efficient use of KEVLAR and Epoxy in its construction. This FuelCel retains the stock mount grommets and fuel petcock assembly so it is ready to bolt right on your VTR.
Finish sanded down to 150 grit we apply a two part sanding primer making your FuelCel the nicest component you have ever painted. Every VTR FuelCel is leak tested at the factory insuring its integrity along with a seven-point quality control inspection process during its manufacturing.
We supply our proprietary quick turn Billet fuel cap for you! Lock option and or Drybreak available.
NO ONE pays closer attention to detail than us!
We are the only manufacturer to offer a lifetime warranty against leaks in the industry, that is how much we believe in the integrity our products.
Free up the Horse Power that is already there!
Honda VTR 1000
7.40 pounds / 3.36 kg lighter
5.3 Gallons / 20.0 liters
$1175.00 standard cap included
Exposed Carbon Panels $200.00
Anyway, source for a larger tank.... if you have the $
http://www.eti-fuelcel.com/VTR.HTML
Our New Honda VTR endurance FuelCel increases the capacity to 5.3 gallons or 20 liters while cutting weight by more than 50%, 7.40 lbs lighter than the stock unit it replaces . Now you can have the additional range you have been needing!. This helps acceleration and also reduces the bikes polar-moment allowing you to turn in faster than before. This is due of course to ETI's efficient use of KEVLAR and Epoxy in its construction. This FuelCel retains the stock mount grommets and fuel petcock assembly so it is ready to bolt right on your VTR.
Finish sanded down to 150 grit we apply a two part sanding primer making your FuelCel the nicest component you have ever painted. Every VTR FuelCel is leak tested at the factory insuring its integrity along with a seven-point quality control inspection process during its manufacturing.
We supply our proprietary quick turn Billet fuel cap for you! Lock option and or Drybreak available.
NO ONE pays closer attention to detail than us!
We are the only manufacturer to offer a lifetime warranty against leaks in the industry, that is how much we believe in the integrity our products.
Free up the Horse Power that is already there!
Honda VTR 1000
7.40 pounds / 3.36 kg lighter
5.3 Gallons / 20.0 liters
$1175.00 standard cap included
Exposed Carbon Panels $200.00
03-10-2009, 05:02 AM
#5
Senior Member
Back Marker
Thread Starter
Join Date: May 2006
Location: Cypress, TX
Posts: 218
"sounds like this is in the wrong forum....maybe in the classifieds"
My post wasn't to sell anything. As we all know, the VTR doesn't have the range other bikes do. I was only submitting an alternative, albeit, expensive cure for this.
My post wasn't to sell anything. As we all know, the VTR doesn't have the range other bikes do. I was only submitting an alternative, albeit, expensive cure for this.
Thread
Thread Starter
Forum
Replies
Last Post
L8RGYZ
General Discussion
14
11-21-2008 08:13 AM
futurehawk
Modifications - Cosmetic
3
04-14-2007 11:08 PM
