WTB: Ugly gas tank (cheap)
07-28-2007, 09:08 AM
#1
Dances with Guardrails
Squid
Thread Starter
Join Date: Apr 2007
Location: Knoxville, TN
Posts: 88
WTB: Ugly gas tank (cheap)
I need a SH tank for a project. Cosmetics are irrelevant, so long as the base pan (bottom) of the tank is in good shape. Really, the tank can be rashed all the way through on the top so long as from the pinch weld on down and the entire underside is intact its fine. Year/color won't matter either.
Thanks!
Thanks!
07-28-2007, 10:06 AM
#2
Senior Member
SuperBike
Join Date: Aug 2004
Location: Atlanta, GA
Posts: 1,802
07-28-2007, 10:36 AM
#3
Dances with Guardrails
Squid
Thread Starter
Join Date: Apr 2007
Location: Knoxville, TN
Posts: 88
Thanks, I didn't see that one.
Not cheap enough, though. Its going to get all hacked to pieces, and the project may ultimately not work so I don't want to sink a bunch of cash into it. That one appears to be fairly nice, I'm looking for one that isn't even remotely presentable.
Not cheap enough, though. Its going to get all hacked to pieces, and the project may ultimately not work so I don't want to sink a bunch of cash into it. That one appears to be fairly nice, I'm looking for one that isn't even remotely presentable.
07-29-2007, 12:20 PM
#5
Junior Member
Squid
Join Date: May 2007
Location: euless
Posts: 7
gas tank
I have one i swapped out, i used it for awhile so no holes pan is good just a dnt on the high right side at the apex of the metal fold. Ill try to get some pics i am located in TX
07-29-2007, 04:16 PM
#6
Dances with Guardrails
Squid
Thread Starter
Join Date: Apr 2007
Location: Knoxville, TN
Posts: 88
Not really concerned with cosmetics... just cheap!
07-29-2007, 05:15 PM
#7
Senior Member
Back Marker
Join Date: Apr 2006
Location: san luis obispo, ca 93405
Posts: 154
$50 shipped
base is fine, small dent that was pulled out on the top left, small pin hole leak from there, but from the half way point on down it is 100% good
base is fine, small dent that was pulled out on the top left, small pin hole leak from there, but from the half way point on down it is 100% good
07-29-2007, 05:38 PM
#8
Dances with Guardrails
Squid
Thread Starter
Join Date: Apr 2007
Location: Knoxville, TN
Posts: 88
07-29-2007, 06:06 PM
#9
WERA #44
Superstock
Join Date: Jul 2007
Location: About 57 miles south of VIR
Posts: 265
I have one that is nice inside, bent in several places,bottom is straight. spray bombed white to prevent rust. It wold be perfect for this, 35 + shipping, I'll have to drain it, got a brand new one to replace it. Thanks, Rob
08-01-2007, 08:26 PM
#10
Dances with Guardrails
Squid
Thread Starter
Join Date: Apr 2007
Location: Knoxville, TN
Posts: 88
PMs sent with questions.
08-20-2007, 02:21 PM
#11
Dances with Guardrails
Squid
Thread Starter
Join Date: Apr 2007
Location: Knoxville, TN
Posts: 88
PING Hardhead
Ok, so, let's try this again...
Please let me know how much for shipping and form of payment you need.
Thanks,
Mike
Please let me know how much for shipping and form of payment you need.
Thanks,
Mike
Thread
Thread Starter
Forum
Replies
Last Post
