WTB: short intake runner
Thread Starter
Senior Member
MotoGP
Joined: Apr 2005
Posts: 5,631
From: Montreal
WTB: short intake runner
AS I have now had the internal engine mods (milled and ported heads, Yoshi Stage 1 cams) performed/installed on my VTR, I would like to try running it with two short intake runners to see if there is any benefit in doing so. Does anyone have an extra one laying around they want to part with?
cheers
cheers
Senior Member
SuperSport
Joined: Jul 2006
Posts: 655
From: Madison Wisconsin
Senior Member
SuperBike
Joined: Aug 2004
Posts: 1,806
From: Atlanta, GA
Mikstr, I have an extra set if you can't find them somewhere else. I have tried two long, two short and the stock setup and can't tell enough difference to go to the trouble of doing it again. I'm back to stock now.
Senior Member
SuperBike
Joined: Jul 2005
Posts: 1,548
From: MN
Mikstr
Did I send the stock ones with the airbox? I thought I had, but if not I can double check the boxes in the garage and see if they are there. so let me know
bill
Did I send the stock ones with the airbox? I thought I had, but if not I can double check the boxes in the garage and see if they are there. so let me know
bill
AS I have now had the internal engine mods (milled and ported heads, Yoshi Stage 1 cams) performed/installed on my VTR, I would like to try running it with two short intake runners to see if there is any benefit in doing so. Does anyone have an extra one laying around they want to part with?
cheers
cheers
Thread Starter
Senior Member
MotoGP
Joined: Apr 2005
Posts: 5,631
From: Montreal
You had indeed sent the two runners with the box. Problem is the short one got sacrificed in one of my experiments.... I am now running one long and one short (OEM set-up) and have an extra long one on hand now. The trials and tribulations of a mad scientist, lol
Senior Member
SuperBike
Joined: Jul 2005
Posts: 1,548
From: MN
you have to crack a few intake runners to make an omelette, ,,,,,,,,,,or is it crack some eggs to make an engine.......or wait, ,,,,,,,,,bend some valves to get the CCTs installed...........I get confused. good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Rufion
Modifications - Performance
6
Jan 14, 2006 10:26 PM
