SOLD SOLD SOLD

Very nice Two Brothers Racing stainless exhaust header. I had already previously cleaned up most of it with a light 200 grit sanding. A little more elbow grease for you and it'll polish up like a mirror. Besides polishing it's in nearly perfect condition. A few tiny scratches on the underside and rear of the front downpipe and a tiny little mark on the right side of the lower section of the header, all pictured. I'm REALLY reaching here and you can probably sand and polish them all out. These follow the stock header routing/outlets so you can use any slip-ons you like including the stock mufflers.

If we could please keep this a "for sale" thread that would be great. You'll pay insured shipping with tracking from South Florida. Paypal "family & friends" please (or please add the 3% paypal fee if you're not comfortable with that). I've been on here for 15 years so if you're newer on here feel free to look up my user name/feedback over the years. I've parted out several complete bikes and sold a ton of parts and exhausts on here. It's a hobby, I'm not a business. Also been on Ebay for 20 years with 100% perfect feedback. Serious inquiries only and no stories please. You pay, I ship. Easy. These are still in real nice shape as shown in the pictures and will easily polish up beautifully. Bear in mind they are about as old as your bike though and are sold AS-IS. $275 plus shipping. Hit me up with any other questions. Thanks for looking and ride safe.

 

 

PM’d...

 

Replied with contact info. I'll get you a shipping price as soon as I finish boxing it up. Thank you.

 

SOLD SOLD SOLD

 

Performance wise is this a good header? I have noticed TBR's crossover is different than Moriwaki's Also the TBR header I have needs the gasket for the rear two piece pipe to the head any info on where I could source this gasket or substitute another type of sealer?

 

I've never dyno tested one so unfortunately I couldn't tell you. For what my 2 cents is worth just looking at it it's very similar to the stock header so while there very well may be some sort of gain there I wouldn't be surprised if there wasn't. I'm sure that gasket can be sourced from any dealer or online from a place like Ronayers, Partzilla, etc via the microfiche. You could also then cross reference the part on Ebay, etc to find the best price as I'm sure it's not unique to a Superhawk. Assuming that's the gasket you're talking about as the TBR header doesn't use any other gaskets. Hope this helps. Take care.

1998 Honda VTR1000F AC MUFFLER | Ron Ayers

Honda 18291-MM8-880 - GASKET, EX. PIPE : Ron Ayers

 

Update for this header...cleaned up great and waiting for gaskets to come for the install, thanks again Capt.!!! Check my “Members Rides” thread for the additional slip-ons I’ll be installing soon once all the needed items arrive 👍🏻👍🏻

 

That's what's up! Gorgeous! As soon as you run the bike with it installed it'll turn a beautiful golden color. Really looks great. Thanks for sharing and thanks again. Enjoy and ride safe!

 

I’m super excited for that gold hue to burn in...I went from 400g to 3000g and then used a little Harbor Freight bench buffing wheel and she shined right up haha