SOLD: 98 For Sale. $2000
Thread Starter
Junior Member
Squid
Joined: Apr 2015
Posts: 13
From: Groves, Texas
SOLD: 98 For Sale. $2000
Great looking bike in Great shape.
Add-ons = Fox rear shock, Delkevic Slip-on exhaust, dbl-bubble wind screen, heated grips, SS braided brake lines.
New = Sparkplugs, Chain & Sprockets, Rear Tire, Rectifier/Regulator.
Removed and cleaned carbs less than 50 miles ago. Also shimmed the jet needle.
Color matched powder coated wheels.
This bike needs nothing. 100% ready to ride anywhere. 26k miles.
* For some reason the pictures don't look that good on here. If you'd like I could text pics to you.*
Located in Groves, TX, just South of Beaumont.
I have (2) other sport bikes, so I'd like to get $2000 for this one to put towards a DRZ400.
Add-ons = Fox rear shock, Delkevic Slip-on exhaust, dbl-bubble wind screen, heated grips, SS braided brake lines.
New = Sparkplugs, Chain & Sprockets, Rear Tire, Rectifier/Regulator.
Removed and cleaned carbs less than 50 miles ago. Also shimmed the jet needle.
Color matched powder coated wheels.
This bike needs nothing. 100% ready to ride anywhere. 26k miles.
* For some reason the pictures don't look that good on here. If you'd like I could text pics to you.*
Located in Groves, TX, just South of Beaumont.
I have (2) other sport bikes, so I'd like to get $2000 for this one to put towards a DRZ400.
Last edited by prosport76; Jun 22, 2016 at 07:30 AM. Reason: Sold
Administrator
MotoGP
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
Argg, very nice looking bike.. Had I not just bought my replacement SH a few weeks ago from a fellow Texan I'd be looking to get yours.
If you put a "Flyer" together and email it to me, I'll show it at the Bikes nights I participate in up here in CENTEX and post on at my range in Killeen.
Erik
If you put a "Flyer" together and email it to me, I'll show it at the Bikes nights I participate in up here in CENTEX and post on at my range in Killeen.
Erik
Senior Member
Superstock
Joined: Nov 2014
Posts: 416
From: Middletown, CT
Thread Starter
Junior Member
Squid
Joined: Apr 2015
Posts: 13
From: Groves, Texas
The stock header is what's on it. The "Y-pipe" that goes to the left side exhaust has been cut off and welded up.
This past weekend I removed and cleaned the the carbs. Did this because it was running a little rough while at slow speeds. Found a pilot/slow jet to be clogged. Also, had issues with cranking it, so replaced the battery about 2 months ago. This fixed the problem for a few weeks but started having issues again. I tested the stator and the regulator. Ended up being a bad regulator. I plan to order a Yamaha regulator this week.
This past weekend I removed and cleaned the the carbs. Did this because it was running a little rough while at slow speeds. Found a pilot/slow jet to be clogged. Also, had issues with cranking it, so replaced the battery about 2 months ago. This fixed the problem for a few weeks but started having issues again. I tested the stator and the regulator. Ended up being a bad regulator. I plan to order a Yamaha regulator this week.
Thread
Thread Starter
Forum
Replies
Last Post
