Parting out '98 VTR in Southern California
06-27-2014, 09:53 AM
#1
Junior Member
Squid
Thread Starter
Join Date: Oct 2010
Posts: 17
Parting out '98 VTR in Southern California
Just purchased a used(and mechanically neglected) 98 Superhawk with a "locked" engine according to the previous owner. He thought it was a CCT issue that caused the lock up, but it turns out the engine was seized due to a spun main bearing.
Decided to part this one out instead of fixing it
I'm located in Duarte, California. All prices are WITHOUT shipping. Please PM me for a shipping quote!
Some stuff I have up on ebay as well. The prices are a little cheaper here on the forums since I won't have to pay the ebay sellers fee if they sell here.
kostritzer | eBay
Front wheel with rotors (SOLD)
Rear wheel with rotor (SOLD)
Main frame $225
(straight, no cracks, clean CA title in my name Non-Op'd)
Fuel Tank (SOLD)
Front Calipers $20 each
Triple clamps $40
Front head with cams and valve cover(valves straight and intact) (SOLD)
Rear head with cams and valve cover(valves straight and intact) $100
stator/alternator cover (SOLD)
flywheel/rotor/starter clutch assy (SOLD)
Clutch cover (SOLD)
Clutch basket complete with discs $40
stock swingarm $25
CBR900RR swingarm(with brace for SH mod) $25
Ventura rack system with bag (SOLD)
Yosh RS-3 exhaust (SOLD)
front fairing stay (SOLD)
Left upper fairing (SOLD)
Right upper fairing(SOLD)
Tail fairing(SOLD)
Solo seat cowl (SOLD)
Stock seat (SOLD)
Front fender(red) $40
Front cowl/headlight surround (SOLD)
Headlight (SOLD)
Tail light $25
Stock under tail (SOLD)
Carburetors $75
Stock Airbox $40
Ignition coils (SOLD)
Wiring harness complete (SOLD)
matching Ignition switch, fuel cap with lock, and rear seat lock with key (SOLD)
Rear subframe(straight) $30
Front forks(straight, some pitting at the top of the forks) $45
Many other parts available that aren't listed. Email me with your parts request and I'll get back to you ASAP.
Decided to part this one out instead of fixing it
I'm located in Duarte, California. All prices are WITHOUT shipping. Please PM me for a shipping quote!
Some stuff I have up on ebay as well. The prices are a little cheaper here on the forums since I won't have to pay the ebay sellers fee if they sell here.
kostritzer | eBay
Front wheel with rotors (SOLD)
Rear wheel with rotor (SOLD)
Main frame $225
(straight, no cracks, clean CA title in my name Non-Op'd)
Fuel Tank (SOLD)
Front Calipers $20 each
Triple clamps $40
Front head with cams and valve cover(valves straight and intact) (SOLD)
Rear head with cams and valve cover(valves straight and intact) $100
stator/alternator cover (SOLD)
flywheel/rotor/starter clutch assy (SOLD)
Clutch cover (SOLD)
Clutch basket complete with discs $40
stock swingarm $25
CBR900RR swingarm(with brace for SH mod) $25
Ventura rack system with bag (SOLD)
Yosh RS-3 exhaust (SOLD)
front fairing stay (SOLD)
Left upper fairing (SOLD)
Right upper fairing(SOLD)
Tail fairing(SOLD)
Solo seat cowl (SOLD)
Stock seat (SOLD)
Front fender(red) $40
Front cowl/headlight surround (SOLD)
Headlight (SOLD)
Tail light $25
Stock under tail (SOLD)
Carburetors $75
Stock Airbox $40
Ignition coils (SOLD)
Wiring harness complete (SOLD)
matching Ignition switch, fuel cap with lock, and rear seat lock with key (SOLD)
Rear subframe(straight) $30
Front forks(straight, some pitting at the top of the forks) $45
Many other parts available that aren't listed. Email me with your parts request and I'll get back to you ASAP.
Last edited by kostritzer; 08-27-2014 at 11:42 AM. Reason: price adjust, added an ebay link
06-27-2014, 10:09 AM
#3
Moderator
MotoGP
Join Date: Jul 2007
Location: Gettysburg, Pa
Posts: 5,071
That's not the way we roll...
Follow the rules or this post is gone:
1. Post a price. Say if shipping is extra or included in price.
2: Post your location, and any buyer locations your not willing to ship to.
3: Post at least one clear picture of the part, assembly, or bike being offered for sale. More is better to a point... if you have a great many high quality shots, consider posting just one or two directly, and linking to the others. That keeps page load times down.
4. All sales will be through PMs. No email addys or Paypal addys are to be posted. The seller is responsible to sell the item to the first responder if the deal works out. If not then it will go to the next person who sends a PM, and so on.
5. eBay links may be posted, however the seller must post a price here and be willing to end the eBay auction early for Superhawkforum.com members.
6. Failure to follow the above rules may result in the post being removed and/or loss of privileges to use the Classified forum.
Follow the rules or this post is gone:
1. Post a price. Say if shipping is extra or included in price.
2: Post your location, and any buyer locations your not willing to ship to.
3: Post at least one clear picture of the part, assembly, or bike being offered for sale. More is better to a point... if you have a great many high quality shots, consider posting just one or two directly, and linking to the others. That keeps page load times down.
4. All sales will be through PMs. No email addys or Paypal addys are to be posted. The seller is responsible to sell the item to the first responder if the deal works out. If not then it will go to the next person who sends a PM, and so on.
5. eBay links may be posted, however the seller must post a price here and be willing to end the eBay auction early for Superhawkforum.com members.
6. Failure to follow the above rules may result in the post being removed and/or loss of privileges to use the Classified forum.
06-27-2014, 10:44 AM
#4
Junior Member
Squid
Thread Starter
Join Date: Oct 2010
Posts: 17
That's not the way we roll...
Follow the rules or this post is gone:
1. Post a price. Say if shipping is extra or included in price.
2: Post your location, and any buyer locations your not willing to ship to.
3: Post at least one clear picture of the part, assembly, or bike being offered for sale. More is better to a point... if you have a great many high quality shots, consider posting just one or two directly, and linking to the others. That keeps page load times down.
4. All sales will be through PMs. No email addys or Paypal addys are to be posted. The seller is responsible to sell the item to the first responder if the deal works out. If not then it will go to the next person who sends a PM, and so on.
5. eBay links may be posted, however the seller must post a price here and be willing to end the eBay auction early for Superhawkforum.com members.
6. Failure to follow the above rules may result in the post being removed and/or loss of privileges to use the Classified forum.
Follow the rules or this post is gone:
1. Post a price. Say if shipping is extra or included in price.
2: Post your location, and any buyer locations your not willing to ship to.
3: Post at least one clear picture of the part, assembly, or bike being offered for sale. More is better to a point... if you have a great many high quality shots, consider posting just one or two directly, and linking to the others. That keeps page load times down.
4. All sales will be through PMs. No email addys or Paypal addys are to be posted. The seller is responsible to sell the item to the first responder if the deal works out. If not then it will go to the next person who sends a PM, and so on.
5. eBay links may be posted, however the seller must post a price here and be willing to end the eBay auction early for Superhawkforum.com members.
6. Failure to follow the above rules may result in the post being removed and/or loss of privileges to use the Classified forum.
06-30-2014, 03:26 PM
#9
Junior Member
Squid
Thread Starter
Join Date: Oct 2010
Posts: 17
TBH I don't know. It had about 2 gallons of gas in it before I disassembled the bike, and the fuel light was not on with the key on. The bike didn't run when I purchased it.
06-30-2014, 03:30 PM
#10
Junior Member
Squid
Thread Starter
Join Date: Oct 2010
Posts: 17
I've just been lurking the forums the last couple of weeks and noticed that it was a popular conversion. I've had the 900RR swingarm for awhile now collecting dust from another project that I never finished(VFR750 track bike).
07-01-2014, 04:42 PM
#11
Junior Member
Squid
Thread Starter
Join Date: Oct 2010
Posts: 17
I put some stuff up on ebay. Here's a link kostritzer | eBay
Prices are better if you buy them from me direct through the SH forum!
Prices are better if you buy them from me direct through the SH forum!
Last edited by kostritzer; 07-09-2014 at 09:15 PM.
07-12-2014, 06:08 PM
#12
Junior Member
Squid
Thread Starter
Join Date: Oct 2010
Posts: 17
I have a bunch of stuff left guys. Some of the smaller things are not listed yet(switches, ignition boxes, etc.), but I'm working on it.
Let me know what you're looking for, It's pretty likely I still have it. The prices I have listed are not set in stone BTW!
Let me know what you're looking for, It's pretty likely I still have it. The prices I have listed are not set in stone BTW!
07-22-2014, 12:53 PM
#13
Member
Squid
Join Date: Nov 2013
Posts: 37
I'm interest in any of the electical ingnition equipment. both boxes in the tail under the seat, ingnition coils,stator, even instrument cluster tack.
(not to get into too much on this thread, but trying to trouble shoot a missing probem and dont know what to do other than replace parts)
Running on one cylinder
Do you still have this stuff how much would you want for it?
(not to get into too much on this thread, but trying to trouble shoot a missing probem and dont know what to do other than replace parts)
Running on one cylinder
Do you still have this stuff how much would you want for it?
07-25-2014, 07:00 PM
#20
Junior Member
Squid
Thread Starter
Join Date: Oct 2010
Posts: 17
Carbs are complete. PM me your email address and I'll send you some pics. I'd recommend cleaning them before installation, they've been sitting for a couple of months now.
Last edited by kostritzer; 07-25-2014 at 07:43 PM.
07-25-2014, 07:03 PM
#21
Junior Member
Squid
Thread Starter
Join Date: Oct 2010
Posts: 17
I do still have both mirrors, but the backsides are scratched up. The fender is still available and in good shape. I'll throw the mirrors in with the fender if you decide to buy it
Thread
Thread Starter
Forum
Replies
Last Post
surfmonkey
General Discussion
11
06-12-2010 11:34 AM
