UPDATED: Ok thank you to everyone for helping me with another successful part out. Here's what's left. If you can use anything please let me know/make me a fair offer and I'll be sure to make you a good deal as I need this stuff gone and will probably toss much of it shortly. Thanks.


BARE SUBFRAMES (2). Straight and cheap. I have two (2). $25 each plus shipping


RADIATOR FAN. Tested and working when the bike was together. Two of the tabs were removed to fit the subframe as it was part of an undertail setup. $20 plus shipping.

REGULATOR/RECTIFIER, finned. I have two (2). Good working order. $25 plus shipping.

STARTER works fine $25 plus shipping

STOCK FRONT BRAKE MASTER CYLINDER. clean and in good used shape. $25 & shipping

RC51 REAR BRAKE CALIPER-clean and in good used shape. Looks identical to the stock Superhawk caliper except the brake line and bleeder screw holes are on opposite sides vs the stock calipers. Used pads included. $20 & shipping

STATOR- Used, was working fine (I believe OEM) $45 & shipping

SIDE STAND & SWITCH $25 & shipping

NICE FRONT SPROCKET COVER- very clean, powdercoated gloss black $25 plus shipping

 

CLEAN 929 SWAP SETUP-FORKS, TRIPLES, AXLE, FENDER - SOLD

929 FRONT WHEEL, ROTORS, METZELER ROADTEC - SOLDSPA 3" TACHOMETER WITH REDLINE LIGHT AND TOP RPM RECALL - SOLD

WEBCAMS CAMSHAFTS W/VALVESPRINGS - SOLD

YOSHIMURA FULL EXHAUST - SOLD


929 FRONT BRAKE CALIPERS AND PADS - SOLD

STOCK HEADER- SOLD


FACTORY PRO +4 IGNITION ADVANCER - SOLD


MOOSE BANSHEE HANDLEBARS AND FREESTYLE INGENUITY RISERS (for 929 upper triple) - SOLD

CARBS W/ CHOKE CABLES & NUTS - SOLD

MORIWAKI REARSETS - SOLD

FAIRING STAY - SOLD

FUEL TANK AND PETCOCK - SOLD

VORTEX FUEL CAP - SOLD

NEW AFTERMARKET STATOR - SOLD

FOX TWIN CLICKER SHOCK - SOLD

MODIFIED STOCK SHOCK WITH RESERVOIR - SOLD

OHLINS STEERING DAMPER AND PRO-TEK 50mm FORK MOUNT - SOLD

STATOR, NEW AFTERMARKET - SOLD

AIRBOX W/ K&N FILTER - SOLD

GSXR1000 STREETFIGHTER HEADLIGHT SETUP - SOLD

FRONT BRAKE AND CLUTCH LEVERS - SOLD

CLUTCH MASTER CYLINDER - SOLD

CLUTCH SLAVE CYLINDER - SOLD

FRAME SLIDERS - SOLD

MANUAL CCT'S - SOLD

GALFER BRAIDED FRONT BRAKE LINES, REAR BRAKE LINE, & CLUTCH LINE - SOLD

DAYTONA DIGITAL UNIVERSAL TEMPERATURE GAUGE - SOLD

SUMMIT RACING 3" DIGITAL SPEEDOMETER WITH 0-60 & 1/4 MILE RECALL - SOLD

900RR BRACED SWINGARM, 900RR CALIPER BRACKET & CALIPER - SOLD

STOCK SEAT - SOLD

STOCK CLIP ONS WITH SWITCHES AND GRIPS - SOLD

AUTOMETER 2 1/16" ELECTRIC FUEL GAUGE - SOLD

CRG HINDSIGHT BAR END MIRRORS - SOLD

SPROCKET COVER, NICKY MODDED - SOLD

RED SOLO SEAT COWL - SOLD

OIL PAN - SOLD

"NICE" CLUTCH COVER - SOLD (I have another, some rash but still solid)

WATER PUMP COVER - SOLD (I have another)

PAIR BLOCK OFFS - SOLD

STATOR COVER - SOLD

REINFORCED FRAME WITH CLEAR FLORIDA TITLE - SOLD

BLACK SOLO SEAT COWL - SOLD

CDI -SOLD

FRONT BRAKE MASTER CYLINDER - SOLD

STOCK SUPERHAWK UPPER AND LOWER TRIPLES - SOLD

IGNITION SWITCHES (2) W/ KEYS. ONE COMES WITH MATCHING SEAT LOCK - BOTH SOLD

STOCK REAR WHEEL, NICE TIRE - SOLD

ENGINE OIL COOLER AND LINES - SOLD

CLUTCH ASSEMBLY - SOLD

STOCK FRONT BRAKE CALIPERS - SOLD

VALVE COVERS - SOLD

CLEAR ALTERNATIVES taillight - SOLD

VENTED TAIL FAIRING - SOLD

CLUTCH COVER - SOLD

TAIL FAIRING - SOLD

 

more (front calipers are sold)

 

more...

 

more..pics....

 

more.....

 

Nice stuff GLWS......

 

I'll take:
-air box with K&N
-Fairing stay
-Mori rear sets

Edit: I looked a couple times, I don't think you posted a price on those carbs. Might be intereted in the carbs too, depending on price

Editedit: Instead of putting another post in his for sale ad, I'll just edit this one.

Spokes, I was wanting to buy and use the K&N filter and make the lid just like you did, then setup the carbs for the F.I.L. mod (buyer would tune it obviously). Was going to be a F.I.L. mod someone could buy, BUT the carbs and K&N were spoken for before I posted.

 

Pm'd for +4.

 

You gunna do my version of the FIL?


If I had the cash I would have jumped on the rear sets and swingarm.

 

***This isn't directed to anyone in particular** Like I said guys, no I don't "hold" anything for anyone, BUT, if someone asks for something, especially if they're a long time member (and often it's someone I've bought and sold with before), I'm going to give them the opportunity to ask a question or two and then to send over payment. I know this gets touchy when 5 people want the same part but I go in order that folks contact me. However if someone falls off the Earth and more than 2 days passes, I'm moving on to the next person. Only trying to be fair to everyone and also myself at the same time. It's kinda hard turning down payment while you're waiting on someone else but I do understand people have lives outside of superhawkforum. So we'll go with 2 days then I move on to the next person. If it's easier (it is) I'm more than happy to provide you my cell#.

I'm pretty diligent on keeping track of who wants what, and in what order folks ask. If someone says they want something but say have a question or two, I'll respond asap. Please try to do the same. If I don't hear back in max 2 days and have several other people in line I'm going to move on. Also if in doubt please use the names of the parts found on the microfiche instead of making up your own names or abbrevations for the parts so everyone's on the same page. Again it's easier to just call me. Thanks again.

 

Interested in the handle bar and risers. Can you tell me how they are mounted on the 929 upper triple? Does it involve drilling or does the riser itself calmp on the forks?

 

intrested in solo cowl please!
regards
andrew

 

pm -ing you on the Yoshi exhaust system

 

any chance you can get a better picture of the bars and risers? mainly the risers

 

I already have my stock forks set up for dirt bars. Very interested in the 929 risers and bars for when I do my swap. please let me know if pending sale falls through.

 

PM'd you Jerry, bars & risers are sold.

 

Is the tank still available? If so,Can you pm me with shipping quote to 30084?

 

 

PM sent with shipping price


Please see the updated parts list everyone. I try to be considerate & update things asap as "sold" once they're paid for. Please understand some other things may already be spoken for as well but I do like to give someone the opportunity to ask a few questions and then to pay. Thanks.

 

Hummm fancy that damper . pm being sent

 

PM sent for the Vortex fuel cap if still available.

 

I say, captain, a super seller!

 

Got my parts a few days ago up here in the Great White North
Very well packaged, better than described, very helpful, and a very upstanding gentleman to deal with.
Thanks Cap'n!

 

Tl;dr PM'ed.

 

Sorry Amit the clip-ons are already sold and listed as such in the second post. First post is what's still available, second post is what has already sold. Have a look and let me know if there is anything else I can help you with. Thanks.

 

Bump on remaining parts. I've also updated/lowered alot of the prices on what's left (added a couple small things too) but nothing is set in stone. Please see the 1st and 2nd posts for what's still available and what is already sold. Really want to move the rest of this stuff out of the garage so if you can make use of something you see don't be shy-let me know and I'll cut you a good deal. Need this stuff gone and would rather someone make use of it instead of toss it.















__________________

 

do you have the right rearset?

 

Sorry bud they're sold per the list of "sold" parts in the 2nd post (this bike didn't have the stock rearsets).