parting out 1999 superhawk in Modesto , CA- corbin seat-ape cct-Wilbers shock
03-13-2014, 09:35 AM
#1
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
parting out 1999 superhawk in Modesto , CA
Rod knock in engine and cracked frame. So parting out the bike.
If you are looking for something that is not itemized and priced let me know.
Front end (forks with racetech .90 springs/ gold comp and rebound valves, triple tree, brake calipers, front wheel, rotors): Forks sold.
calipers, front wheel, rotors, triple tree still available.
Rotors: $80 + shipping
Front Wheel: $100 + shipping
Front Calipers: $60 + shipping
Carburators: $110 + shipping
Bottom/chin fairing: $75 + shipping
Radiator, OEM , left side, undamaged: $50+ shipping
1 X Ape MCCT new in package: $42 shipped SOLD
Sprocket cover: $20 shipped
Rear Brake pedal: $26 shipped
Shift lever assembly w/ bell crank and rod: $35 sold
Cylinder Head w/cams: $115 shipped-front cyl head sold. rear available
Piston and con rod set: $25 + shipping per side.
Clutch cover: $115 SOLD shipped. Water pump included, CPS not included
Wilbers rear shock( 200lb rider setup) : $450-Sold
Corbin seat: $200 + shipping SOLD
blinkers: $15 each+ shipping. or $30 shipped for the pair-sold all.
Headlight: $115+ shipping.- sold
Subframe: $25+ shipping
Guage cluster (36000 miles): $100+ shipping- SOLD
Dr. Honda stacks: sold
Tail fairing: $135SOLD
Solo Seat cowl: $90-sold shipped
Passenger foot peg brackets: $50 shipped-SOLD
Ignition control Module: $50 shipped sold
ECU converter: $32 shipped sold
Left Rider rear set: $52 sold
Oil cooler: $10 -SOLD
Radiator aftermarket, pair, undamaged, left side is unused: $70 sold
Clutch, complete with steels, fibers, inner hub, pressure plate, springs and bolts: $50 shipped.
^clutch with outer hub: $75
Stator: $65 + shipping
Stator cover, clean: $65 Shipped- Will include a new oem gasket for extra $9-SOLD
Rear Wheel: $65 + shipping sold
Front fairing stay, air filter, handlebar switches and kick stand: SOLD
V & H pipes: Sold
pulse generator: sold
rear brake caliper: sold
Windshield: sold
Headers: sold
If you need something that is not listed, please ask.
If using paypal. Please cover the fees or send as gift. Thanks
front wheel
Remaining fairings with damage shown: $20 + shipping each piece
oem yellow left
aftermarket fiberglass, white
headlight fairing, one of the headlight mounting post
headlight fairing, where the right side fairing meets on the bottom front corner
If you are looking for something that is not itemized and priced let me know.
Front end (forks with racetech .90 springs/ gold comp and rebound valves, triple tree, brake calipers, front wheel, rotors): Forks sold.
calipers, front wheel, rotors, triple tree still available.
Rotors: $80 + shipping
Front Wheel: $100 + shipping
Front Calipers: $60 + shipping
Carburators: $110 + shipping
Bottom/chin fairing: $75 + shipping
Radiator, OEM , left side, undamaged: $50+ shipping
1 X Ape MCCT new in package: $42 shipped SOLD
Sprocket cover: $20 shipped
Rear Brake pedal: $26 shipped
Shift lever assembly w/ bell crank and rod: $35 sold
Cylinder Head w/cams: $115 shipped-front cyl head sold. rear available
Piston and con rod set: $25 + shipping per side.
Clutch cover: $115 SOLD shipped. Water pump included, CPS not included
Wilbers rear shock( 200lb rider setup) : $450-Sold
Corbin seat: $200 + shipping SOLD
blinkers: $15 each+ shipping. or $30 shipped for the pair-sold all.
Headlight: $115+ shipping.- sold
Subframe: $25+ shipping
Guage cluster (36000 miles): $100+ shipping- SOLD
Dr. Honda stacks: sold
Tail fairing: $135SOLD
Solo Seat cowl: $90-sold shipped
Passenger foot peg brackets: $50 shipped-SOLD
Ignition control Module: $50 shipped sold
ECU converter: $32 shipped sold
Left Rider rear set: $52 sold
Oil cooler: $10 -SOLD
Radiator aftermarket, pair, undamaged, left side is unused: $70 sold
Clutch, complete with steels, fibers, inner hub, pressure plate, springs and bolts: $50 shipped.
^clutch with outer hub: $75
Stator: $65 + shipping
Stator cover, clean: $65 Shipped- Will include a new oem gasket for extra $9-SOLD
Rear Wheel: $65 + shipping sold
Front fairing stay, air filter, handlebar switches and kick stand: SOLD
V & H pipes: Sold
pulse generator: sold
rear brake caliper: sold
Windshield: sold
Headers: sold
If you need something that is not listed, please ask.
If using paypal. Please cover the fees or send as gift. Thanks
front wheel
Remaining fairings with damage shown: $20 + shipping each piece
oem yellow left
aftermarket fiberglass, white
headlight fairing, one of the headlight mounting post
headlight fairing, where the right side fairing meets on the bottom front corner
Last edited by rick; 11-27-2015 at 12:47 PM. Reason: update sold parts
03-13-2014, 12:45 PM
#6
Member
Squid
Join Date: Mar 2013
Location: Oak Grove KY/Fort Campbell KY
Posts: 53
03-14-2014, 09:10 AM
#9
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
03-15-2014, 12:52 AM
#10
Member
Squid
Join Date: Mar 2014
Location: CA
Posts: 94
03-15-2014, 01:30 AM
#11
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
Jknight had PM'ed me before we talked about it.
But he hasn't confirmed if he is taking it or not yet. I will start sending out parts Monday. So if he isn't buying it then , you are next in line. The classified rules sticky says first contact, gets first shot. I'd have preferred first pay, first get lol.
But he hasn't confirmed if he is taking it or not yet. I will start sending out parts Monday. So if he isn't buying it then , you are next in line. The classified rules sticky says first contact, gets first shot. I'd have preferred first pay, first get lol.
03-16-2014, 07:38 PM
#13
Member
Squid
Join Date: Mar 2014
Location: CA
Posts: 94
Jknight had PM'ed me before we talked about it.
But he hasn't confirmed if he is taking it or not yet. I will start sending out parts Monday. So if he isn't buying it then , you are next in line. The classified rules sticky says first contact, gets first shot. I'd have preferred first pay, first get lol.
But he hasn't confirmed if he is taking it or not yet. I will start sending out parts Monday. So if he isn't buying it then , you are next in line. The classified rules sticky says first contact, gets first shot. I'd have preferred first pay, first get lol.
03-16-2014, 08:06 PM
#14
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
Anyways nobody has committed to buying the cover yet.
03-16-2014, 08:56 PM
#16
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
The bottom end is supposedly shot. And I also found the frame to be cracked in two places after I bought the bike.
Anyways, the tank is already sold to my buddy. The front side fairings are not all perfect. The tail fairing, solo seat cowl and the chin fairings are damage free.
One of the fiberglass fairing is in good shape too. The small plastick fairing around the headlight is also good. The rest have damage but are usable.
03-16-2014, 09:01 PM
#17
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
03-16-2014, 09:40 PM
#19
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
The bike had been dropped before and come with fiberglass fairing on one side , which too had damage. So I am not positive the fairing stay did not sustain damage. So the price is accounting for possible damage. If it's is damaged it is not more than, what you can't slightly bent to make it normal. there is no obvious damage to it that I can tell with it off the bike.
03-19-2014, 10:56 PM
#29
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
woohoo. Finally got done taking the whole bike apart. There it is, just the engine bottom end left on the stand.
The frame is in the backyard. The rest of the bike is all there in the boxes laying around.
I think I spent more time thinking about how to separate the enigne frame and swingram than actually doing it. I thought about hanging the frame from a fiberglass ladder using straps, but finally decided to support the engine and remove everything else off it.
OP updated with more prices and more pictures being added here now. All parts are now ready to be shipped.
The frame is in the backyard. The rest of the bike is all there in the boxes laying around.
I think I spent more time thinking about how to separate the enigne frame and swingram than actually doing it. I thought about hanging the frame from a fiberglass ladder using straps, but finally decided to support the engine and remove everything else off it.
OP updated with more prices and more pictures being added here now. All parts are now ready to be shipped.
03-19-2014, 11:08 PM
#30
Senior Member
Back Marker
Thread Starter
Join Date: Apr 2012
Location: Modesto, CA
Posts: 236
Wiring harness with Headlight modulator connected( signal dynamics): 
Cylinder head- good shepe, valves in spec, matching cams included:
Cylinder head- good shepe, valves in spec, matching cams included:
Last edited by rick; 04-23-2014 at 07:51 PM.
