Lots of Super Hawk parts for sale/giveaway!
11-15-2006, 03:33 PM
#1
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
Lots of Super Hawk parts for sale/giveaway!
I'm getting ready to put a bunch of parts on ebay, but there doesn't seem to be a lot of bidding going on in VTR land, so I thought I'd let them sit here for a while. I have photos of most of it.
-engine case, crank, rods, bearings. Mild scoring on rear cylinder. Perfect for boring for an engine project. Keep yours running while you build!
I even have new con rod bolts I'll throw in. I'll send it loosely assembled with some really good stock pistons. $50
-clutch basket, hub and pressure plate. Great condition. $100 *SOLD*
-complete transmission. good condition. shifts perfectly. $100 *SOLD*
-rear swingarm with spools. No damage. see updated post
-DID ERV2 520 chain and AFAM 15/42 sprockets. Used but serviceable. $50 *SOLD*
-rear subframe. slightly bent (racked sideways) but easy to straighten. Black $30
-complete stock exhaust system. Bafflectomy. All or parts. $75
-clutch master cylinder, with lever. Perfect. $50 *SOLD*
-RaceTech RC51 .95kg/mm fork springs. $75
-good wiring harness $40 *SOLD*
-both side case covers. left is great, right needs paint but otherwise good (not the one I crashed on!) left $40, right $25, rt gasket $10 *ALL SOLD*
-rear wheel in great condition. see updated post
-new (400 miles) cam chain tensioners. Factory parts with then new part number that supersedes the old. I haven't heard of the new ones failing. $30 *SOLD*
-'00 RC51 front wheel, slightly bent but straightenable. $25 *SOLD*
Updated posts with pictures are there for much of this stuff.
-engine case, crank, rods, bearings. Mild scoring on rear cylinder. Perfect for boring for an engine project. Keep yours running while you build!
I even have new con rod bolts I'll throw in. I'll send it loosely assembled with some really good stock pistons. $50
-clutch basket, hub and pressure plate. Great condition. $100 *SOLD*
-complete transmission. good condition. shifts perfectly. $100 *SOLD*
-rear swingarm with spools. No damage. see updated post
-DID ERV2 520 chain and AFAM 15/42 sprockets. Used but serviceable. $50 *SOLD*
-rear subframe. slightly bent (racked sideways) but easy to straighten. Black $30
-complete stock exhaust system. Bafflectomy. All or parts. $75
-clutch master cylinder, with lever. Perfect. $50 *SOLD*
-RaceTech RC51 .95kg/mm fork springs. $75
-good wiring harness $40 *SOLD*
-both side case covers. left is great, right needs paint but otherwise good (not the one I crashed on!) left $40, right $25, rt gasket $10 *ALL SOLD*
-rear wheel in great condition. see updated post
-new (400 miles) cam chain tensioners. Factory parts with then new part number that supersedes the old. I haven't heard of the new ones failing. $30 *SOLD*
-'00 RC51 front wheel, slightly bent but straightenable. $25 *SOLD*
Updated posts with pictures are there for much of this stuff.
Last edited by RCVTR; 11-04-2007 at 07:16 AM. Reason: Updating what's available
11-16-2006, 04:44 AM
#2
Senior Member
SuperSport
Join Date: Aug 2004
Location: MICHIGAN
Posts: 731
how much for the left cover?
11-16-2006, 04:45 AM
#3
Senior Member
SuperSport
Join Date: Aug 2004
Location: MICHIGAN
Posts: 731
do you have a good fairing stay?
11-16-2006, 08:58 AM
#4
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
11-16-2006, 08:59 AM
#5
Moderate-whore
MotoGP
Join Date: Nov 2005
Location: Leander TX!!
Posts: 9,049
Tail section, undertail?? rear sub frame??
How much for the chain and sprockets? How many miles?
How much for the chain and sprockets? How many miles?
11-16-2006, 10:06 AM
#6
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
No tail section.
I have an undertail with the LP light relocated and trimmed up.
Chain and sprockets are the good stuff, with ~3k miles. *SOLD*
email me and I'll send pictures.
I have an undertail with the LP light relocated and trimmed up.
Chain and sprockets are the good stuff, with ~3k miles. *SOLD*
email me and I'll send pictures.
11-16-2006, 10:11 AM
#7
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
I just added my new Honda CCTs. 400 mile on them. New part number that supersedes the early parts.
11-16-2006, 10:12 AM
#8
Moderate-whore
MotoGP
Join Date: Nov 2005
Location: Leander TX!!
Posts: 9,049
I'll give ya $50.00 for the subframe and the chain/sprocket set up....
that's all I have got, and it's close to christmas, and I have 9 kids to feed, as well as a hangnail....
that's all I have got, and it's close to christmas, and I have 9 kids to feed, as well as a hangnail....
11-16-2006, 10:18 AM
#9
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
You're getting warm.
11-16-2006, 10:21 AM
#10
Moderate-whore
MotoGP
Join Date: Nov 2005
Location: Leander TX!!
Posts: 9,049
I beleive part of the post said something about give a way?? LOL....
How about $65.00, and that is with me skipping Thanksgiving.....
How about $65.00, and that is with me skipping Thanksgiving.....
11-16-2006, 10:52 AM
#11
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
see revised pricing at the top.
And i'll throw in some other goodies. what do you need? turn signals? I have some cool no-cut rears that came with my Mori high-mount exhaust.
And i'll throw in some other goodies. what do you need? turn signals? I have some cool no-cut rears that came with my Mori high-mount exhaust.
11-16-2006, 05:06 PM
#12
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
That's probably high.
I'm in no hurry. It'll probably be around when you get past the Holiday spending frenzy. I'm not advertising anywhere else. I'll let you know if I do.
I'm in no hurry. It'll probably be around when you get past the Holiday spending frenzy. I'm not advertising anywhere else. I'll let you know if I do.
11-16-2006, 06:37 PM
#13
Moderate-whore
MotoGP
Join Date: Nov 2005
Location: Leander TX!!
Posts: 9,049
That's not a bad deal, I just got my calipers and rotors in today, so I have enough projects to keep me busy for a while
....I may check back with you on the sub frame in a few weeks, if you still have it...:-|
....I may check back with you on the sub frame in a few weeks, if you still have it...:-|
11-17-2006, 08:19 AM
#14
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
I added prices. I'll just bump it to the top now and then.
11-17-2006, 08:33 AM
#15
Junior Member
Squid
Join Date: Oct 2006
Location: Salt Lake City
Posts: 8
Which price for ch/sprockets
What do you want for the chain/sprockets, $50 (1st post) or $100 (second thoughts, perhaps, in the later post). I'm interested, but a little underfunded too, at the moment.
Jay
in
Salt Lake
Jay
in
Salt Lake
11-17-2006, 09:04 AM
#16
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
$50
$100 was with the subframe.
$100 was with the subframe.
11-17-2006, 10:17 AM
#17
Junior Member
Squid
Join Date: Oct 2006
Location: Salt Lake City
Posts: 8
ygm
11-17-2006, 01:17 PM
#18
Junior Member
Squid
Join Date: Oct 2006
Location: Ormond Beach, FL
Posts: 4
Front Fairing or Headlight?
11-17-2006, 03:09 PM
#19
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
No. the front fairing and frame head were used to stop the bike from ~75 MPH. I do have a nice head casting that was cleanly separated from the rest of the frame, but I'm keeping it for the memories it provides.
11-17-2006, 07:40 PM
#20
Senior Member
MotoGP
Join Date: Sep 2006
Location: Austin, Tx
Posts: 4,138
Could you check out how much it would cost to get the engine to 78729?
11-18-2006, 07:44 AM
#21
Junior Member
Squid
Join Date: Sep 2006
Posts: 13
wplfeman
does your front wheel have rotors if so -is it still available asap jeff 920-729-9801 or jwolfesneenah@aol.com
11-20-2006, 08:14 AM
#22
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
11-20-2006, 07:12 PM
#23
Junior Member
Squid
Join Date: Nov 2006
Posts: 1
looking for both reservoirs (clutch and brake) from where they connect to the master cylinders to the lids....If anyone could help me out, I am a good listener.
11-27-2006, 11:17 AM
#24
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
I haven't taken the time to weigh everything. I'm sure it will be right around 50# for the cases, crank and rods.
At 50 lbs. UPS ground is $36.55. Since I'm not real positive about the weight, how about $50 for the parts and $50 shipping?
If it was me, I'd buy it for that!
cheers,
Rand
At 50 lbs. UPS ground is $36.55. Since I'm not real positive about the weight, how about $50 for the parts and $50 shipping?
If it was me, I'd buy it for that!
cheers,
Rand
11-27-2006, 03:03 PM
#25
Senior Member
MotoGP
Join Date: Sep 2006
Location: Austin, Tx
Posts: 4,138
Ha! I was just ribbing you on the other thread about this! LOL That sounds like a very good deal to me so let me get past the first and collect another rent check, then we can do the deal. For now, consider it sold - funds forthcoming. Were you in Houston on business? Lovely town! Was considered America's most dangerous for a while. God - a whole month - you're lucky you got out alive - most people are in so deep by that time they have to accept a transfer & relocation package. 
10-29-2007, 05:26 AM
#26
Member
Squid
Join Date: Sep 2007
Posts: 42
HOW MUCH FOR THE TRANNY TO 75020
10-29-2007, 07:04 AM
#27
Senior Member
SuperSport
Join Date: Aug 2007
Location: Eagle, ID.
Posts: 599
I'll take the CCT's, PM sent.
10-29-2007, 07:19 AM
#28
Senior Member
SuperBike
Thread Starter
Join Date: Dec 2005
Location: South Lake Tahoe, CA, USA
Posts: 1,689
CCT's are sold.
$20 to ship the trans.
Doing maintenence on the list...
$20 to ship the trans.
Doing maintenence on the list...
10-29-2007, 07:28 AM
#29
Boosted
SuperSport
Join Date: Aug 2007
Location: Sioux Falls, SD
Posts: 642
engine sold?
11-03-2007, 01:03 PM
#30
Member
Squid
Join Date: Dec 2006
Posts: 47
transmission
$100 shipped to reno nv 89506
