When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hello all! My bike is getting a bit of an upgrade and will no longer accommodate my steering damper. It’s a Hyperpro CSC, with a couple of lapping days and about 200km of Street use. From having ridden the bike without it, I did notice a difference in front end stability; less twitchy and held lines much better. It’s the original Hyperpro mount (steel), with a custom 6061-T6 spacer for top nut. It’s a bolt-on setup as is, included are the two longer stainless tank bolts. Asking $150(usd)+shipping, it should fit into a small box with bubble wrap and I will be more than happy to get you a shipping quote.
damper is off the bike now and ready to be shipped. Image added.
Last edited by 2.5i; 11-14-2018 at 08:35 AM.
Reason: corrected typo
11-10-2018, 05:05 AM
and will no longer accommodate my steering damper. It’s a Hyperpro CSC, with a couple of lapping days and about 200km of Street use. From having ridden the bike without it, I did notice a difference in front end stability; less twitchy and held lines much better. It’s the original Hyperpro mount (steel), with a custom 6061-T6 spacer for top nut. It’s a bolt-on setup as is, included are the two longer stainless tank bolts. Asking $150(usd)+shipping, it should fit into a small box with bubble wrap and I will be more than happy to get you a shipping quote.
