FS: Marchesini's, Penske, Corbin, and Muzzy
Thread Starter
Junior Member
Squid
Joined: Sep 2010
Posts: 28
FS: Marchesini's, Penske, Corbin, and Muzzy
I hate this being my 1st post, but I didn't see a welcome section for first time posters. I do not own a SuperHawk, I own its little brother. I'm also a year plus contributing member of the Hawkgtforum.com (same user name). A very good friend (20yrs) of mine sold his Super Hawk, and is not very computer literate. He has a few parts that he needs to sell. I will handle the electronic portion of the sales and the parts will be shipped from Bend, OR. If you'd like to talk to him directly I will give you his number through a pm.
Marchesini Magnesium Wheels with bearings and cush drive, $1,000 (REDUCED) for the pair shipped to lower 48, obo (tire not included in the sale). I just learned that one of the spacers from Marchesini that come with these wheels were modified to help fit the rear caliper when doing the 900rr swingarm brace mod. It was later found out that modification was to be made on the rear brake itself, so a washer the same inside and outside diameter of the spacer was added to compensate for the modifications to the Marchesini spacers that were made. Just to be clear, there was NO modifications made to the wheels, only to one of the spacers (but has been compensated for with a washer). These wheels will fit a stock SH as is. All necessary spacer spacers, and cush drive, and sprocket will be provided to make this a quick 1hr (or less) swap: SOLD
Since some have requested additional pics here we go:
And here is what they looked like on the bike:
Penski, 8983 set up for a 180 lbs. rider, $450 (REDUCED) shipped to lower 48, obo: SOLD
Some people have asked about the condition of the bottom end of the shock and wondered weather it was spot welded. It has NOT been spot welded, It is only the ride height that has been played with. Here is a closeup pic of the area. It looks worse in pictures than it actually is. Feel free to ask more questions or make an offer:
Corbin Gunfighter seat with red piping, $175 shipped to lower 48, obo: SOLD
Muzzy CF Slipons with midpipes, $350 shipped to lower 48, obo: SOLD
Muzzy Aluminum Slipons with midpipes, $275 shipped to lower 48, obo: There is a small scrape on one of the cans, from a trackday cornering exercise (he did not go down). SOLD
Marchesini Magnesium Wheels with bearings and cush drive, $1,000 (REDUCED) for the pair shipped to lower 48, obo (tire not included in the sale). I just learned that one of the spacers from Marchesini that come with these wheels were modified to help fit the rear caliper when doing the 900rr swingarm brace mod. It was later found out that modification was to be made on the rear brake itself, so a washer the same inside and outside diameter of the spacer was added to compensate for the modifications to the Marchesini spacers that were made. Just to be clear, there was NO modifications made to the wheels, only to one of the spacers (but has been compensated for with a washer). These wheels will fit a stock SH as is. All necessary spacer spacers, and cush drive, and sprocket will be provided to make this a quick 1hr (or less) swap: SOLD
Since some have requested additional pics here we go:
And here is what they looked like on the bike:
Penski, 8983 set up for a 180 lbs. rider, $450 (REDUCED) shipped to lower 48, obo: SOLD
Some people have asked about the condition of the bottom end of the shock and wondered weather it was spot welded. It has NOT been spot welded, It is only the ride height that has been played with. Here is a closeup pic of the area. It looks worse in pictures than it actually is. Feel free to ask more questions or make an offer:
Corbin Gunfighter seat with red piping, $175 shipped to lower 48, obo: SOLD
Muzzy CF Slipons with midpipes, $350 shipped to lower 48, obo: SOLD
Muzzy Aluminum Slipons with midpipes, $275 shipped to lower 48, obo: There is a small scrape on one of the cans, from a trackday cornering exercise (he did not go down). SOLD
Last edited by melmsrt4; Feb 19, 2011 at 11:22 PM. Reason: Correction on weight setup for Penske - 180 lbs. rider
Banned
MotoGP
Joined: Aug 2007
Posts: 5,942
From: Lake View Terrace, CA
Thread Starter
Junior Member
Squid
Joined: Sep 2010
Posts: 28
Thread Starter
Junior Member
Squid
Joined: Sep 2010
Posts: 28
Thanks for the greeting. Ya, still putting it back together from my gravity test. Job situation has changed and don't have much time to work on it. Hope to have it finished up within the next month or so. It is killing me going this long without riding.
