98 hawk parting out cbr1000 front ohlins rear
Member
Squid
Joined: Mar 2010
Posts: 73
From: Ozark, MO
Do you have the headlight?
Also, more importantly do you have the brake that the rear brake pedal mounts to mine broke last night?
rear tail section I wasnt sure if that sold yet or not.
Thanks in advance
Also, more importantly do you have the brake that the rear brake pedal mounts to mine broke last night?
rear tail section I wasnt sure if that sold yet or not.
Thanks in advance
Thread Starter
Shredding Asphalt
Superstock
Joined: May 2008
Posts: 299
From: Oceanside
i do have a headlight but it was opened up for a street fighter project that never happend its still works fine and the only down side is it was sealed with a orange rtv and has a 1/4 hole drilled on both sides. (all of which is covered when full fairing)
im not sure what your talking about in reference to the rear brake but I got the entire setup from rear sets to pedal and master cylinder calipers pads and disc
tail section is sold
im not sure what your talking about in reference to the rear brake but I got the entire setup from rear sets to pedal and master cylinder calipers pads and disc
tail section is sold
Member
Squid
Joined: Mar 2010
Posts: 73
From: Ozark, MO
i do have a headlight but it was opened up for a street fighter project that never happend its still works fine and the only down side is it was sealed with a orange rtv and has a 1/4 hole drilled on both sides. (all of which is covered when full fairing)
im not sure what your talking about in reference to the rear brake but I got the entire setup from rear sets to pedal and master cylinder calipers pads and disc
tail section is sold
im not sure what your talking about in reference to the rear brake but I got the entire setup from rear sets to pedal and master cylinder calipers pads and disc
tail section is sold
Ok, does the headlight have the clip that holds the bulb in?
The brake pedal braket is numbered as number 2 in the photo
Member
Squid
Joined: Mar 2010
Posts: 73
From: Ozark, MO
Any luck with the shipping of the parts. I know your busy moving but I am down to one vehicle now and could really use those parts.
don't mean to bug ya. It's been a week since the money transfer. Thanks man
don't mean to bug ya. It's been a week since the money transfer. Thanks man
Last edited by amazin; Oct 14, 2010 at 10:55 AM.
Thread Starter
Shredding Asphalt
Superstock
Joined: May 2008
Posts: 299
From: Oceanside
lol yeah sorry i got super swamped at work and just got my housing up for sale so its been fun. the rear wheel I still got along with brakes and cush drive. and it is black
Parts I still have
radiators (no hoses)
clutch lever and master and slave (no lines)
wiring harness ( it goes in the trash tonight)
carbs
passenger peg mounts and pegs
tail light
swing arm
fan
clutch side rearset (stock)
Parts I still have
radiators (no hoses)
clutch lever and master and slave (no lines)
wiring harness ( it goes in the trash tonight)
carbs
passenger peg mounts and pegs
tail light
swing arm
fan
clutch side rearset (stock)
Thread Starter
Shredding Asphalt
Superstock
Joined: May 2008
Posts: 299
From: Oceanside
wiring harness is still intact. but the R/R was sold and I sold the tail light connectors so if you had those it would be complete.
let me know if you want it ill go dive in my dumpster pile
let me know if you want it ill go dive in my dumpster pile
Thread Starter
Shredding Asphalt
Superstock
Joined: May 2008
Posts: 299
From: Oceanside
only down side is I only have one spark plug wire. So its missing the tail light connectors and one spark plug wire. Also if you would like I can lay it all out and take a picture so you can verify with a fiche. let me know
lol well it was all household junk no gross trash
it looks like it will fit nicely in a med flat rate box so if you want it ill sell it for 5 bucks over what a med flat rate shipping would be
lol well it was all household junk no gross trash
it looks like it will fit nicely in a med flat rate box so if you want it ill sell it for 5 bucks over what a med flat rate shipping would be
