VTR1000 Best Color Scheme Design
12-01-2015, 11:33 PM
#31
Senior Member
SuperBike
Join Date: Mar 2012
Location: New South Wales Australia
Posts: 1,544
If at first you don't succeed try again.
Apparently the site is no longer up, however you can contact Mike direct via E Mail or they are on Facebook I believe.
Some of the guys over on VTR.Org have had success via Email.
Apparently the site is no longer up, however you can contact Mike direct via E Mail or they are on Facebook I believe.
Some of the guys over on VTR.Org have had success via Email.
12-02-2015, 06:54 AM
#32
Senior Member
Superstock
Join Date: Mar 2015
Location: San Fran Freako
Posts: 393
This link is from 2004.
https://www.superhawkforum.com/forum...fairing-28998/
I repeat, the above is a post from 2004.
Drool drool!
https://www.superhawkforum.com/forum...fairing-28998/
I repeat, the above is a post from 2004.
Drool drool!
12-02-2015, 10:51 PM
#34
Junior Member
Squid
Join Date: Apr 2015
Posts: 10
sorry for the delayed response, i do not know who makes the fairings but reading the afterwards comments, i do actually have the single seat as well and has the same curves everywhere. all the body is fiberglass, from top to bottom except the original seat and the front wheel fairing. i had alot of cracks i had to fix before i could get her really straight. i still feel the bike is missing something to really spice it up any help on that would be great. the paint darkens alot at night and when its cloudy almost can look maroon or black then the spots of sun its like a super red.
jack flash, the back rest is a temporally fix untill i can find a corbin seat with backrest at a reasonable price i made it just to make the gf feel more comfortable on the longer rides. the horn is aftermarket it was sold to me without a horn so why not buy the loudest one you can fine, the white part is just a metal bezel over the other metal bezel.
THANKS ALOT FOR THE AWESOME COMMENTS! still have alot i want to know about the superhawk and this forum is making it happen!
jack flash, the back rest is a temporally fix untill i can find a corbin seat with backrest at a reasonable price i made it just to make the gf feel more comfortable on the longer rides. the horn is aftermarket it was sold to me without a horn so why not buy the loudest one you can fine, the white part is just a metal bezel over the other metal bezel.
THANKS ALOT FOR THE AWESOME COMMENTS! still have alot i want to know about the superhawk and this forum is making it happen!
Last edited by blurkx; 12-02-2015 at 10:56 PM.
12-03-2015, 02:12 PM
#35
Senior Member
Superstock
Join Date: Apr 2013
Location: Seattle
Posts: 250
If you find a Corbin seat, the backrest is available on Amazon. Some guy makes them to fit the corbin seat. I've had both, and for under $70, the one on Amazon did just fine.+
Oh yeah, my favorite color scheme is the Tapeworks graphics kit.
Oh yeah, my favorite color scheme is the Tapeworks graphics kit.
Last edited by FTL900; 12-03-2015 at 02:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
