SuperHawk Forum
0 2020/12/18 15:40:02
0 2020/12/18 15:39:57
0 2020/12/18 15:35:06
Way better than stock. 👍
Way better than stock. 👍
0 2020/11/19 07:57:20
Brings out the boy racer in the bike. 😜
Brings out the boy racer in the bike. 😜
0 2020/11/19 07:57:13
Bare as it gets. Now to remove the carbs, do the tps mod, and put in the mcct's which was the whole reason in the first place to tear it all down. 😉
Bare as it gets. Now to remove the carbs, do the tps mod, and put in the mcct's which was the whole reason in the first place to tear it all down. 😉
0 2020/11/19 07:49:34
Fairing removed and getting ready for fork tube removal so I can ship them off to DMr Performance for custom rework and all the best goodies to make them top notch. 😍
Fairing removed and getting ready for fork tube removal so I can ship them off to DMr Performance for custom rework and all the best goodies to make them top notch. 😍
0 2020/11/19 07:49:25
Gas tank removed and marked all hoses and bungs with colored tie wraps so I know where the hoses hook up correctly. Fuel petcock will be rebuilt too.
Gas tank removed and marked all hoses and bungs with colored tie wraps so I know where the hoses hook up correctly. Fuel petcock will be rebuilt too.
0 2020/11/19 07:49:14
Naked rear.
Naked rear.
0 2020/11/19 07:49:03
Here they are lit up and yes they're nice and bright. Visibility went up one level for sure. 😂😉
Here they are lit up and yes they're nice and bright. Visibility went up one level for sure. 😂😉
0 2020/11/19 07:41:16
Led markers with a plate light delete as well. I'll be using plate mounting bolt led's for the plate light.
Led markers with a plate light delete as well. I'll be using plate mounting bolt led's for the plate light.
0 2020/11/19 07:41:05
Seat cowl approved as it fits well and no more issues with a reg going bad.
Seat cowl approved as it fits well and no more issues with a reg going bad.
0 2020/11/19 07:40:55
This is after cutting off the pieces I didn't want and started smoothing things out. Finished product will be sweet looking. 😜🤟
This is after cutting off the pieces I didn't want and started smoothing things out. Finished product will be sweet looking. 😜🤟
0 2020/11/19 07:34:53
This is the spare set I got off fleabay for modifying. I'm keeping my originals just in case I need them. 👍
This is the spare set I got off fleabay for modifying. I'm keeping my originals just in case I need them. 👍
0 2020/11/19 07:34:37
And the after. Much cleaner looking.
And the after. Much cleaner looking.
0 2020/11/19 07:31:14
This is the before.
This is the before.
0 2020/11/19 07:31:06
Side view and again looks great. 👍
Side view and again looks great. 👍
0 2020/11/19 07:27:52
Finished product and looks so good. 😍
Finished product and looks so good. 😍
0 2020/11/19 07:27:42
Fresh cut with the hole saw.
Fresh cut with the hole saw.
0 2020/11/19 07:27:31
Front rotor sexiness with steel rotor and aluminum hub. Yup bling it is. 😍🤟
Front rotor sexiness with steel rotor and aluminum hub. Yup bling it is. 😍🤟
0 2020/11/19 07:07:46
I've always liked the EBC brand so I went with it. 🤷🏼‍♂️🤟
I've always liked the EBC brand so I went with it. 🤷🏼‍♂️🤟
0 2020/11/19 07:07:34
Oh yeah and in a sexy red dress. 😍😉 Should smooth things out a bit.
Oh yeah and in a sexy red dress. 😍😉 Should smooth things out a bit.
0 2020/11/19 07:07:24
Yup after 22 years I figured why not.
Yup after 22 years I figured why not.
0 2020/11/19 07:07:18
Mirror extensors so I can use the factory mirrors and not have to worry about modifying something to fit.
Mirror extensors so I can use the factory mirrors and not have to worry about modifying something to fit.
0 2020/11/19 07:07:12
Samco hose kit with a hose clamp kit for the steed. 👍
Samco hose kit with a hose clamp kit for the steed. 👍
0 2020/11/19 07:07:06
ProBolts wind screen bolts and fairing bolts in 7075-T6 aluminum. eBay bolt kits are junk. 🤮
ProBolts wind screen bolts and fairing bolts in 7075-T6 aluminum. eBay bolt kits are junk. 🤮
0 2020/11/19 07:06:58
New frame sliders for that just in case. 😬😳
New frame sliders for that just in case. 😬😳
0 2020/11/19 07:06:51
This will also be installed on the rear and yes I'm keeping it Yellow. Love that color and will add a nice contrast to the sea of red on the bike.
This will also be installed on the rear and yes I'm keeping it Yellow. Love that color and will add a nice contrast to the sea of red on the bike.
0 2020/09/23 19:40:45
And finally my Coerce fork brace, shifter brace bushing, and race boy looking oil cap. 😂😜
And finally my Coerce fork brace, shifter brace bushing, and race boy looking oil cap. 😂😜
0 2020/09/23 19:40:38
Krieger mcct's and block off plates.
Krieger mcct's and block off plates.
0 2020/09/23 19:40:31
Got my lower belly pan and it looks great. 😍🔥
Got my lower belly pan and it looks great. 😍🔥
0 2020/09/23 19:40:24
Love these PitBull stands so far and found if you put a 2x4 under the kick stand the bike is almost vertical and stable enough to use the rear stand to lift and support the bike without any worries.
Love these PitBull stands so far and found if you put a 2x4 under the kick stand the bike is almost vertical and stable enough to use the rear stand to lift and support the bike without any worries.
0 2020/09/23 19:33:57
Yup got the R/R MOSFET thingamabob to help with the consistency of the charge and with my vast electronic background I'll be upgrading grounds and wiring as needed for a tip top electrical system. Bought 5 weather proof Bosch relay setups for various places and should be fun.
Yup got the R/R MOSFET thingamabob to help with the consistency of the charge and with my vast electronic background I'll be upgrading grounds and wiring as needed for a tip top electrical system. Bought 5 weather proof Bosch relay setups for various places and should be fun.
0 2020/09/23 19:33:22
Caliper rebuild kits for the F4i calipers and rebuild kit for the master cylinder kit too. New levers as well.
Caliper rebuild kits for the F4i calipers and rebuild kit for the master cylinder kit too. New levers as well.
0 2020/09/23 19:33:04
Front and rear wheel bearings and fork bearings too. Got some good lithium based waterproof grease to keep things nice and lubed.
Front and rear wheel bearings and fork bearings too. Got some good lithium based waterproof grease to keep things nice and lubed.
0 2020/09/23 19:27:58
2 bar radiator caps for higher boiling point and waiting on the red Samco hoses to arrive so I can redo the cooling system. Hadn't decided if I should use the factory hose clamps or get a set of Samco clamps. 🤔🤷🏼‍♂️
2 bar radiator caps for higher boiling point and waiting on the red Samco hoses to arrive so I can redo the cooling system. Hadn't decided if I should use the factory hose clamps or get a set of Samco clamps. 🤔🤷🏼‍♂️
0 2020/09/23 19:27:19
I'm going to chop off the rear foot peg retainers and smooth them out as I'll never have a passenger on the bike to worry about. Got these as spares from a member here for which I'm grateful. These should be fun and will look good once done.
I'm going to chop off the rear foot peg retainers and smooth them out as I'll never have a passenger on the bike to worry about. Got these as spares from a member here for which I'm grateful. These should be fun and will look good once done.
0 2020/09/23 19:24:29
CBR600F4i calipers, master cylinder, and levers for better braking. Even got a new reservoir cap. 😂😉
CBR600F4i calipers, master cylinder, and levers for better braking. Even got a new reservoir cap. 😂😉
0 2020/09/23 19:20:26
16/ 43 520 chain and sprockets for better gearing.
16/ 43 520 chain and sprockets for better gearing.
0 2020/09/23 19:20:20
0 2020/09/23 19:20:14